Search results

Awesome idea! I'm going to steal this for sure. You keep writing UHMV. I think you mean UHMW; ultra high molecular weight polyethylene [emoji106] Sent from my Pixel XL using Tapatalk

"I hate the idea of spending money on labour and much rather spend the money on tools and time on learning new skills." I think this is the unwritten GJ mantra [emoji16][emoji106] Sent from my Pixel XL using Tapatalk

Re: Ridgid 14" Bandsaw Wheel Can you have a welder put the broken pieces back in or fill it? Then file it back into shape. Sent from my Pixel XL using Tapatalk

You're gonna run into problems if you extend the output leads. Huge losses if you go 100' (200 out and back) . The current on the input is much lower. Sent from my Pixel XL using Tapatalk

Not sure how thick the surrounding metal is that you're dealing with. When the footpeg bolt hole failed on my 4-wheeler, I filed out the surrounding material and pressed the hex side of a flanged nut with the correct M10-1.5 thread into the enlarged hole. With the the flange providing some...

Yeah, that's a "you ****" for sure. Sent from my Pixel XL using Tapatalk

McmasterCarr.com Or, if you find one the right diam but longer, cut it and rethread it. Don't need a lathe, just clamp a die in a vise and turn the bolt with a wrench if you don't have a tap and die set Sent from my Pixel XL using Tapatalk

Might want to try these 1/16" 7014 rods. They strike up super easy and run at only 40-50 amps and I find that 7014s give me the cleanest, easy to control puddle of any rod I've ever tried. I'm not real experienced, just a hobbiest welder so take my advice for what it's worth (very little). But...

Nice! That'll last you the rest of your life [emoji482] Sent from my Pixel XL using Tapatalk

Curious to see how you're going to piece it so you can get it into the house [emoji106] Sent from my Pixel XL using Tapatalk

The vise might mar the chuck, but yuo could try wrapping it in a rag before clamping in a vise. Or you might try getting a piece of large round stock and grinding some flats to fit in the chuck. Sent from my Pixel XL using Tapatalk

I picked up a couple of small cylinders from a retiring plumber (20cf and 40cf) for cheap. One was CO2, the other refrigerant. AllGas swapped them to an 80cf argon tank for me. Sent from my Pixel XL using Tapatalk

Very clever [emoji106] Sent from my Pixel XL using Tapatalk

That should be in the thread of awesome! Where'd you get a poston like that? Sent from my Pixel XL using Tapatalk

Subscribed Sent from my Pixel XL using Tapatalk

Awesome repurpose job! Very clever [emoji106] Sent from my Pixel XL using Tapatalk

Many of my favorites are already listed like; Project Binky Ave Weld.com Welding tips and tricks This old Tony and many others. But I like to play music while I'm working in the old garage. While I like a pretty wide variety, here are my favorites; Sina - a German girl who rocks the drums...

I would think that if the thread pitch and diam are is the same, it seems to me; 1) chasing a 55* groove with a 60* groove would blunt the top of the threads slightly 2) chasing a 60* groove with a 55* groove would dig the trough slightly deeper. If the pitch is not the same, it won't work...

Very nice mods Sent from my Pixel XL using Tapatalk

No. But you can get the ******* version just by flipping through to look at the pics [emoji3] Sent from my Pixel XL using Tapatalk