Search results

You didn't put this thing on a battery that was in a running car did you?

Headed back to Frederick, talked to a buddy that lives near the store and he says they've restocked some more, almost an entire row of these in every length in both straight and curved plus sets of three in both as well. Won't have time till the weekend to get up there but he said he could see...

Same thing, no honor in store so did it online on the phone and got back in line. I said I had an internet order to pickup, he looked at me funny and then pulled it up, and then shook his head when he saw it.

They're great until they start losing bristles and then you'd better be wearing a heavy apron, I've picked out several bristles from my shirt when using them in the drill press when removing rust from tools and metal. Used it to torque the bolt on my harmonic balancer, needed to be at 300lbs...

Wave 10 jacksons at him and be prepared to walk away if he refuses.

no problem, I've shared it once but I'll share it again here, go to Fastenal and type clearance item in the search bar, then expand the categories and you'll find lots of good stuff super cheap, I bought some 6013 and 7018 rod for pennies on the dollar, plus some great deals on flux core too...

are you using them for ball joints? if so then these are a steal http://www.fastenal.com/web/products/details/0267306 http://www.fastenal.com/web/products?term=0267307&searchMode=productSearch

I've used the HF helmets for a few years because the Jackson helmets were so expensive, then this one dropped to $85 back in May http://www.amazon.com/dp/B00BFJLRD4/?tag=atomicindus08-20, thank you camelx3 and I have to say it's night and day for seeing the puddle both in stick and mig although...

^ this If you've never seen a CrV socket fail it's like exploding shrapnel and happens so quick you don't know it's failing until it does. Hardened bolts that have galled are Cr-V socket killers on impact guns.

I should have stock piled 4 coils while I had the chance!

It doesn't take much to outlast the new paper thin Cman boxes, IMO General is making one of the best boxes for the buck today.

It was the only tool in Frederick, MD that was worth looking at the rest of the tool section was sad. Happened across some cold weather coveralls too and if I didn't have my old trusty Walls I would have bit at $29

Scored some of these as well, pretty nice price, $12.99 for the 3pc and 8.99 for the large straight. Will probably head back to pick up a few more before they're gone. I really like that they have capped ends so you can beat on them unlike the Cman reds which I also have. It's rare to find...

Large Bearing Separator Pittsburgh Automotive - item#3979 PASS Was on sale for 24.99 and used a 20 off Worked well on pulling the bearing off my center spool to put a part time kit in the transfer case. <iframe width="560" height="315" src="//www.youtube.com/embed/1BsmWUjz1_A"...

You can use a 20% on a sale item but if an item already has a coupon then you can't use an additional on top. Most of the time you'll find the better deal using a 20% off on a sale item. During the parking lot sale the cheap grinders were on sale for 9.99 and I used a 20% to knock it down...

Anyone been to the store in Frederick MD? It's about a 90 min round trip for me and I'd rather not make the trip just to find none!

Ditto on all said above!

I'd like to ship my order to my nearest store but that's not an option at checkout.

Amazon just updated the only two orders not cancelled as delivery on Oct 16 Bahco 2-300-14-0-0 Needle Cut 0 File, 10-Pack $12.95 Sold by: Amazon.com LLC Bahco 2-304-14-2-0 Round Needle Cut 2-File, 10-Pack $17.10 Sold by: Amazon.com LLC Not holding my breath at this point

I have two orders out of 6 that haven't been axed yet but I'm not holding my breath