Search results

I have a Craftsman 113.29003 radial arm saw and I'm looking for the switch, key and hopefully the correct screws. Part number for the switch is 30485, trim is 30704, cover is 30484 and key 30483.

My commercial property has linoleum (12x12) glue on tiles. There's several places where the tires are coming apart as the floor has been patched to make it level. The previous installer used some sort of soft white filler to "level' the floor. Any ideas on how to patch and level small 4-6 tile...

I live in Central California where the temperature ranges from 30F to 115F. My home is two story and the main AC/Heater unit is a remote style that's at least 20 years old. The upstairs unit has had the capacitors replaced several times and I think my service company is just patching a fault...

I have a barely used Delta brand, Chinese made crappy drill press. I got it through an incentive program where I used to work. For a while I thought my drill bits were flexing as they began to wander when they would hit the item to be drilled. It turns out that with about 200 holes drilled, the...

I just purchased a borascope from Ebay that I saw on youtube (AVE channel). It was way too good to pass up. For a mere eighteen bucks I got a three meter (9foot) android/PC borascope. I couldn't figure out how to get the software from my pc to my phone so I downloaded an app (camerafi) and...

I'm not a soldering wiz and now my cheapo RadioShack soldering iron just failed while trying to do a desolder. I've seen threads discussing soldering stations. I'm thinking of an adjustable temperature bench top unit. I seem to do all types of soldering, delicate, moderate (stereo install, wire...

I'm in the process of rebuilding my Bosch Pather sawzall and I broke the triac Number (Motorola) SC146D B943. It's a two wire triac. I found two on ebay with the SC146D, but they are three wire and the suffix of the part numbers is different. Any idea if a two wire will work? Or if anyone is...

We have a coin counter that I need to repair and I'm thinking using fiberglass to mend it. First I need to remove all the adhesive from the duct tape that my wife used to patch it. The part I'm repairing is cheap thin plastic without any identifying markings. I tried lacquer thinner and it...

After much too long I'm wiring up my 5HP 20amp 60 Gallon Craftsman two stage compressor. It's about 75 feet from my breaker box. I'm thinking I should just man up and use 10/2, a 30 amp breaker and a cut off box at the compressor. Can I get away with 12 gauge wire?

25 Years ago I bought my 5HP 60 gallon Craftsman air compressor. Since day one it's spewed oil out the oil fill/breather. After buying our current home I'm FINALLY installing my compressor and turned it over by hand to ensure everything is ok. It whistles out the oil fill cap (there's a 1/8 hole...