Search results

This will be to mount a rear bumper to a Jeep. It does not matter if I ran a structural and it shows Grade 5 would work, I want to use the strongest bolt possible that will fit and meet my corrosion needs. That just happens to be 8 @ 7/16” bolts in fine thread. I’d love to use stainless for...

That is good to know. Do they compensate for the coating thickness when you buy the accompanying nut? The application I have in mind is a through bolt that would have a Flat, Lock, Nut stack up.

This is in reference to the newest deeper 44" set. Can you take the larger drawers out of the top chest and exchange them for some of the thinner drawers in the bottom chest? I'd like to get all thinner drawers in the top, and have the thicker ones on the bottom. I'm pretty sure I saw...

While looking for some Grade 8 fasteners, I happen to notice McMaster has grade 8s in two types of coating. What I consider the traditional Yellow Chromate found in every hardware store and one called Zinc Aluminum. the description says the Zinc Aluminum is 5 times more corrosion resistant. I...

They are all Eezi-Awn roof top tents made in South Africa

Does anyone know of a source for this latch? https://cdn.shopify.com/s/files/1/2278/0587/products/Dart_0879_1100x.jpg?v=1542234473

Correct. The countersunk. McMaster list them as Flat Heads.

This is an after market flat belly up skid. I feel should own stock in anti seize. Sadly, I just had one strip out even though I don’t tighten to spec and use lots of anti seize. It had to be a total fluke since all the others came out perfectly. I had to weld a sacrificial hex bit in it...

I’m having difficulty finding a specific type of bolt. I am looking for an M12 flat head that uses Torx instead of an Allen key. It needs to be 8.8 or 12.0. The M12s are used to hold the transfer case skid on my Jeep. I feel the torx bit will be less likely to strip out than the Allen...

I’m now leaning towards some of southco’s offerings. The rubber t-handles are staring to seem like a good idea. Plus they have several others that might work in the space I have

Is there some sort of table that attaches for vertical use? Either by HF or aftermarket?

I’m trying to avoid rubber though as this will see sun 365days a year.

I am very limited on space so something that has more than 2”-2.5” of throw in a handle won’t work. I need something that pulls straight up like this or the rubber ones that stretch up and lock in a cradle.

GF Members, I need your help finding a source for T-Handle Draw Latches in Stainless. I am looking for one like this unit from McMaster. I'm sure there is a source that has these in various size, with various tension...etc. It also has to have a 90deg mounting plate for the T-Handle. I'm...

I love push mowing my lawn. My wife and I fight over who gets to do it.

So I’m guessing there wasn’t a lawnmower at NPS19????

This is sadly on the bottom side of my jeep frame. I wish I could put it in a Mill or even a drill press. The rescue bit might work. Anyone ever put a mill end in a hand held drill?

I need to drill out some 12.9 M12 flat head bolts. Would everyone recommend M42 cobalt set 135deg?

I have the 2863-20, it is bit bigger than I'd like, but I never have to worry about it taking something off. Axles nuts, Control arms bolts, fan nuts, they call come out instantly. The only thing I worry about is so much torque that it will just bust off the bolt.