Search results

I am trying to remove scratches from plastic (I believe acrylic), and was wondering if anyone has a recommended product (and technique) to use? So far I tried this product from NOVUS (please don’t laugh if it’s junk), only because it’s been floating around my car cleaning supplies for...

So after lots of reading on here I finally decided to clean and lube my SK ratchets. Out of 5, only 1 even had any kind of grease or oil in it. On the first one I learned just how “springy” the clips are and it shot out of my pliers. May find it one day, or maybe not. So in the meantime, does...

Linemaster pneumatic control pedal (model 3B-30A2-S) and 522-B14 foot guard. Used with typical wear marks, but in good working condition. Pedal is secured to the cover with industrial Velcro. New brass barbed fittings are for 3/8” ID air hose. Perfect for use with a sandblast or beadblast...

I recently parted with my big Kalamazoo belt grinder 2x72 because it was simply way more than what I needed. So I'm looking for a Multitool setup. I came across this on CL, but I don't know much about WEN bench grinders. I see the RPM rating, but not horsepower (which typically you see...

I am looking for an economical heating solution in my detached garage. 25’x17’ (with 8’ ceiling). Fully insulated including the ceiling, standard garage door at one end and glass slider at the other. Detached from the house and no gas line is available. I’m in northern CA so winters aren’t...

Anyone here have experience with the DeWalt Hood Light? Pros/Cons? It looks like it would be extremely handy, and I like that's its cordless and folds up. I'm not too crazy about the price, but if its well built and is going to last I'm fine spending the $$. All my cordless tools are DeWalt...

Hi, Does anyone know where I could find a PDF of a manual (not eBay) for a Craftsman 113.24591 Drill Press? I googled it and can find one for a “24611” model. Are these very similar? I’m not in dire need, but just like to have the manuals for my machines for parts/repairs. Cheers!

I am making a switch panel for my truck that will mount under an aftermarket head unit. The mounting hardware will be one M4 screw on either side. The kicker- the mounting surface is plastic and I only have 0.47” (wide) of surface to work with for the nutserts (or similar) and most I’ve seen...

I recently acquired a older Yakima roof rack basket from my father-in-law and the rubber coating has deteriorated a bit from sitting in a hot attic for years. To the touch its sticky but nothing comes off on you hands. I washed it down well with soapy water to clean it up and let it dry - no...

The other day at work I step outside for a call and in the dirt under a bush spy a full set of Paramount Allen Wrenches - totally rusted over. Ok, not a huge come-up but still, made in USA so I figure why not clean them up. 36 hours in Evapo Rust and they look great. Question - any...

I got a welding cart/cabinet from HF for Xmas and really am not a fan of the huge “Chicago Electric” logos that they plastered on three sides. I think it’s screened on (though could be paint), does anyone have any idea if it can be removed without damaging the rest of the paint? Cheers!

Hey All, I have a several SK ratchets that I am slowly cleaning up and upgrading to Double Tooth as time allows and was curious what size snap ring pliers are needed? Or can I get by with a small needle nose plier? I know several companies make nice sets, but I don't do much work that...

I have a Kalamazoo S272 Belt Grinder and was looking for a miter gauge for the work table (its already slotted). I reached out to Kalamazoo and they do not make one for it. Any suggestions on where I may source one? Are there standard sizes for the miter bars? Or am I wasting my time- just...

I recently picked up a new tool box with a wood top, and would like to make a stainless cover to put over the wood. To those who have this kind of setup already- do you what gauge metal was used? :beer:

This may be a really silly question- but does any know if DeWalt makes a carrying bag for drills/impacts that has dividers similar to the Makita cube bags? I've always just used the soft bags that come with the drills, but it would be nice to have a way to keep things just a little more...

Hey all, I recently got a belt sander from my work and other than a Kalamazoo decal, 2”x72” belt, and Baldor 1 HP motor there are no real identifying marks or model numbers. I’ve looked on the Kalamazoo site and didn’t see any current models that mimic this one. I emailed Kalamazoo but haven’t...

Hey all, Does anyone have any experience with this disc sander from Harbor Freight? https://www.harborfreight.com/12-inch-direct-drive-bench-top-disc-sander-43468.html I did a search here on the forum and couldn't find this one specifically. Videos on YouTube made it sound like a decent buy...

After reading about lots of good results with evapo rust both here and elsewhere online I decided to give it a try on some old binder chains I had. Before After 2.5hrs I’m really impressed, so I’ll let them soak for a few days. My question- after rinsing the chemicals off with water and...

Hi All! I'm new here, from the north bay area in California. I found this forum a while back when googling automotive and tool tips/reviews- tons of good info & knowledge! I'm a weekend mechanic and welder, and I'm slowly trying to take on bigger projects as time/money/tools allow it. I...