Search results

I went with these for my new Eaton. Got them from McMaster for about $7.50 each. They are rated at 300lbs each so its a bit overkill although my compressor weighed 950lbs with the shipping pallet!! They are available in all different load ratings from 35lbs to 600lbs each. Heres a link to the...

You might want to check out Eaton Compressors. Heres a link to there single phase units. http://www.eatoncompressor.com/page/page/504747.htmThey make a real nice 80gal, single phase, 2 stage and 5 running hp. It draws 23amps. It lists for $1430. Heres a pic I bought a 4cyl 7.5hp 80gal...

I went with these for my new Eaton. Got them from McMaster for about $7.50 each. They are rated at 300lbs each so its a bit overkill although my compressor weighed 950lbs with the shipping pallet!! :eek: They are available in all different load ratings from 35lbs to 600lbs each. Heres a...

I have become a fan of Kroil.

I agree. Not near enough motor. My new Eaton puts out 26cfm@175psi and uses a true 7.5 hp running motor. It draws 32amps at 220v and requires a 50amp 220v breaker. Heck the motor itself weighs 180lbs!! 1.5hp, 220v or not aint gonna cut it.....Sorry.

Compressor is SOLD! Thanks for looking.

My Lincoln MIG uses the 6-50. I have been slowly converting my other 220 toys to the 6-50 plug style. I made an extension cord that will fit all of them, so it's simple and convenient.

Thanks for the advice. $500 OBO

Still here!

2 reasons I guess. First and foremost, more performance. My new compressor has 26cfm at 175psi!! Second I only wanted to buy one more compressor. I did a lot of research and settled on a nice Eaton. I probably went a bit overboard, but I should not have any lack of performance with my new one.

That's kind of what I thought. I guess it's the economy.

I installed the Maglite brand LED upgrade bulb in my 3D cell. It is much better than the Krypton IMHO. I feel it's brighter and the batteries will last nearly forever. I also installed a non Maglite LED upgrade in my Minimag and it's ****. I think Maglite offers an upgrade LED for the...

Still available. No interest at all???

Yes it will. I recommend this Dayton http://www.air-n-water.com/product/G73.html I have one in my 20x20 insulated garage and on low I can comfortably work in a t-shirt (and pants)! It is more than enough for a typical 2 car garage. Mine will keep my garage about 60 on low and it's been in the...

Here are the specs and a few pics. Its a Coleman Powermate Industrial 2 stage air compressor. 80 gallon tank. 6.5hp American made Century motor. 175psi Runs on 220v. Requires a 30amp 220v breaker. 11.9cfm @ 100psi and 11.3cfm @ 175psi. Comes with a 5 foot cord with a 50amp plug. Has been used...

Compressor is SOLD!!! Thanks for the interest.

I have a G74 in my 20x24 garage. Had it for a few years. I have been really happy with it. I rarely run it much higher than low. It's hanging in a corner from the ceiling. It is quiet and small.