Search results

I went cast iron and the only disappointment was not buying 2.

https://weldcotemetals.com/klear-view-plus-auto-darkening/ or https://www.esabna.com/us/en/sentinel/index.cfm

Not sure which barrel you have but you can use the latest Fast tip barrel on any of the 30As.

I would suspect the manual for your machine will say 25 CFH but they are not paying for your gas. The gas does two things, shields the weld pool and cools the mig gun(not whip or stinger). With a 175 amp machine I would suspect you will be welding 20 gauge to 1/4" material. At the lower end of...

I have never heard of an AC wire machine. AC primary input but DC output.

Very cool journey, beautiful workmanship.....congrats! It would be cool if you could find a uniform complete with hat to wear at shows.

Feet for the bottom of a shop cabinet. 193? MG J-2 part.

My experience with cast aluminum is hit or miss. You never know how much zinc is in it until you strike an arc. The worst case has been to let the zinc vaporize, burr to clean it up then add some filler and do this until you can make a nice bead.

For the price this is a nice helmet, https://weldcotemetals.com/klear-view-plus-auto-darkening/ If your helmet has sensitivity and delay adjustments you can adjust the amount of time to change from dark to clear. Of course this will be affected by where you are welding(inside/outside) and amperage.

I have run both. Liked the Millermatic 211 enough that I almost bought it but a home shop does not need a 6th mig machine. Great arc on both primary voltages and plenty of top end punch. The Lincoln 210MP was ok on mig, did not have the ability to run stick or tig but the welding web guys say...