Search results

checking in to ask about the Walk in cooler design...Did you use a Coolbot ot other A/C controller?

We have one. it's like a centrifugal clutch with a cable on the saw. it's only on newer versions (20 years or less) I don't think they are sold any more. Mainly because Miter Saws and Table saws have become less expensive, and do the same jobs safer and more accurately.

Rental vs. owned makes a heater you can take with you a little more attractive. Are you already using NG in the home?

Reasoning being that perhaps the generator is not big enough to run all the household. The fact it's portable makes that a possibility. (and you will notice I did mention a switch to isolate it from the main power supply.)

The "Cleanest" way to set a backup generator is basically a sub panel with the circuits you want on the backup to plug the Generator into.behind a lockout to disconnect them from feeding power back to the grid. f you have a bulk propane tank you could run a line to attach the generator fuel...

At some point you have to resign yourself that "No matter what, it's going to be better than what I had" Comparison is the Thief of Joy

OK Climate Zone is 8, 9, 10...Minimum temp of 15 for a few days a year...so frost depth is minimal... Northern California Coast. Pad is gravel, no Concrete.... The concern I guess is Wind load.

"His tool box is paid off. Better get your hooks in him!"

On the ranch is a 50x120 open sided hay barn with I beams as the uprights every 24 feet . It was built in the 60's . Probably 18 feet tall with a slight pitch to the roof. Given out usually wet and windy winters, Adding walls to this barn would certainly improve the functionality of it. When...

What is the Water production rate in gpm? How big of a pressure tank? Is there an additional water storage tank that can help with high demand times and recharge? My house is 735 feet from my well with a 1/2 hp pump and a pressure tank. 3/4 inch PVC pipe, and I share that with the...

on a video I watched, the areas that chipped were where folks rotated hot tires in place on a DIY finish. If anyone wants to feel good about their poorly finished concrete floors, I'd be happy to show them the 76 year old floor in my garage with ripples and waves from a less than ok finishing...

My cousin gave me a Craftsman toolset in the 90's that was a great start. When it comes down to the majority of things you have to do to a house when you move in : Hang pictures Clean drains/Jtraps, adjust bathtub popup drains reattach loose trim patch holes in Drywall, paint and retexture...

Looks good. Her ein CA we pay $28.00 per 40# bag of mesquite like that.

I primed one coat and painted the topcoat with Hammered Grey Rustoleum Rattlecan.

This Weekend I degreased and sanded the workbench in prep for paint. After scrubbing with a bristle brush and Gunk brand Multi Surface Degreaser, I soaked the top in Vinegar, then sanded the top with a angle grinder abrasive pad. Thespictures are the test patch of regular Vinegar, left for...

Thank you. Now i know what to search for on CL. Although the "deals" usually don't know the brand names...

Adam I think your brush hook was a home-made contraption.

Test of the Degreaser just before dark Left Drawer was degreased Right drawer wasn't also any suggestions for what to do with the blue parts drawers that came with the bench?

My new Angle Grinder got put to use to knock down the toe catchers in the concrete floor