Search results

Thank you for your words of support. It's really hard enough to live in constant tension, realizing that in fact nothing depends on you and you are deprived of everything familiar at the whim of someone incomprehensible. As long as I have the opportunity to publish my posts, it is not known how...

:beer: It will be the coolest tractor ever. :ROFLMAO: This is an interesting speedometer gear drive design. Unfortunately, I do not know if there is such a drive on our trucks. But you've given me an interesting idea, and I need to think about it. (y):beer: We are still "taking care" of our...

Of course it 's a cable . The electronic speedometer appeared very late on Soviet cars. I had a 2000 VAZ-2110 car with an electronic speedometer on it. And on exactly the same VAZ-2110 , but only in 1999 , it was with a cable drive.

Thank you for your congratulations! I continue to work on the tractor. I extended the transfer case shift lever and slightly changed the angle of the lever. Now it's convenient to switch. I also decided to maximize the use of the display on the dashboard. I made a light bulb that shows...

I installed the front brakes on the tractor to continue testing. There is only one brake so far, on the front right wheel. A longer test run showed that it is necessary to make a wheel turn limiter. Lowering the speed and thrust is more than enough. The video shows that I drove into the garage...

This is what the front brake caliper looks like. That's what I'm going to install on my tractor.

Yes, I'll probably put separate brakes on the rear wheels.

I started making brakes for my tractor. The main brakes will be hydraulic front, disc brakes. Maybe later I'll add separate brakes on the rear wheels. The operation of the tractor will show this. So far, I have made a bracket for the brake pedal and the main brake cylinder. Temporarily fixed it...

Yes, of course I considered this option. And most likely I will install another one if I don't find the original one in working condition from the same motor.

I think it's a problem with the vacuum and I can't set the level in the float chamber. I've already replaced all the gaskets, but still, when purging the carburetor ducts, the air is poisoning. In addition, the carburetor from the Oka car has an interesting design, it does not have screws for...

Thanks! I'm trying to do this, but so far the best thing I've found is installed for free on my tractor. :) Thanks! I think the problem is solvable.

Conducted sea trials of the cooling system, exhaust, etc. What can I say, the exhaust turned out to be successful, the sound is pleasant, bass, I would call it 1/4 of the V8 sound :) . There are questions about the cooling system, maybe I have a clogged radiator or there is not enough pump...

I was working on the tractor in the garage again. A lot of work has been done, but outwardly little is noticeable. I checked the cooling system and filled it with water first. It turned out that the gasket under the water pump was not holding and the water was pouring in a stream. And in order...

I installed the thermostat, connected all the pipes to the cooling system. For the test, I will first pour water, if everything is fine, then I will pour antifreeze. I used the pipes as an extension cord ... plumbing plastic pipe. Maybe I'll replace it with a metal one later. I also connected...

It's a great stabilizer. I used it with an additional radiator. Thanks! Yes, the little things take a lot of time, especially when you make non-standard decisions. Most likely, yes, I plan to make a manual throttle. A cooling system is required for full sea trials. Right now, I can't leave...

There are some tractor-related tasks that may not be immediately apparent, but they can take up a significant amount of time. The production and adjustment of the gearshift linkage may seem like a straightforward process, but I spent three days (or rather, three evenings) on it. Additionally...

Thanks! :beer: Thanks! I don't have my own trailer, but I have a friend who will help me take the tractor to the village. By the way, he also helped to transport my first tractor, tractor then fit into a Volkswagen transporter T4 van.

The configuration of my tractor is as follows - the engine and gearbox from a front-wheel drive vehicle, a transfer case with a 1:3 reduction and a rear axle with a ratio of 4.1, wheels R15. According to my calculations, the speed should be about 5 km/h in the first reduced gear. I'm thinking of...

I took the first meters on my tractor. Now he can move around not only using me as an engine :). For a complete test, you need to make a cooling system and preferably brakes. It is also necessary to make an exhaust system, a muffler and a gearshift. In general, all the components are working...

It is quite possible that I do not have such information. Yes, it's quite understandable, it doesn't just come to us like that... A completed project is great! (y) Thanks! It's certainly a good idea... Another important element was installed on the tractor yesterday. This is the driver's...