Search results

They have 2 monitor types on the slide top based on age of the unit. I do not have the older monitor number but I can grab the one off my split top tomorrow. Also, the flip lid cart has a smaller monitor to work in the space available. I'll post that up as well tomorrow.

I've bought 4 of these Milton s-506 in the last year and each one of the Milton are 5 psi or more out of calibration. None of my employees like using them because of this. Sadly they lack the quality they once had. I bought the blue point unit with round dial gauge and it is much better. Plus...

The company has been great to deal with on my 10hp emax when it had a tank valve failure out of warranty. They were quick in sending out the part free of charge. I had ordered a oil and filter service kit at the same time and had it all to my door in 1 day. I will buy another unit to replace...

I've have all the magnesium impacts from over the years. The mg725 was good when it came out but now falls short at normal psi. I run all my stuff at 160 psi and they really wake up. I also never used the mufflers supplied as they really choke off the performance. I did buy the pt850 when it...

Here is the monitor mount on the scanner station and the back of the krsc split top. You will have to drill some holes for the monitor mount but it wouldn't be a big deal.

I'll try to get pictures tomorrow of my Zeus cart and my krsc split top and post them up.

Alldata has a tablet system that has obd integration. We do not use that as I have separate scan tool systems that function much better.

We use alldata manage online at my shop. Great for us, and integrates with quick books online. Also use their alldata repair for repair info. Less than 300 a month for both. You can talk them down on cost with a little negotiation. I believe you also get a discount if your part of the AutoZone...

A better idea is to use polyiso foil faced foam board placed and taped down first, then have the metal tin roof screwed down over it. It's more effective for insulation value and function in the long term. That's how my wick building was built back in the late 80's.

Took a quick picture of mine today. Only gets used now for storage of electrical supplies and my hydraulic flaring tools and other odds and ends.

I've got a box that looks just like that. It was my first tool box I bought used way back in 2002. I used to lube it with grease. But now I've used super lube last time and it's working great.

Epiq is deeper and also has the lift type latch built into the front of the drawer. Master is what the krl boxes are called now and they are still really good build quality. They are almost as deep as an epiq, the main difference is the latch system. The safety latch is under the drawer...

Use a hydraulic cement type grout to pack under the base plates when you get the height set. A trowel and a little elbow grease is all that's needed to pack it under. After it cures, it allows full baseplate contact to solid surface...

My driver dropped off my new zeus workstation this week. I traded in my verus edge workstation. The zeus is definitely more responsive when compared to the edge. I've had the edge since 2016 and it served me well, but the new workstation is sweet in the extreme green, something that was not...

The carbide scrapers work great. I've got a snap on version and it takes minimal effort to remove gasket material by back dragging. I'd recommend them for any toolbox.

I had to buy an ares 15010 volvo timing tool set for a customer car several months ago and it is well built. Never had any of their regular tool stuff in my hands so can't comment about the sockets and such. But their specialty tool kits I have used in the past have always performed the task at...

I've got a snap on krsc430 in extreme green that I got in 2015. The split top is awesome in every situation but one. I originally bought it to hold all my common use wrench sets and alignment tools for use to roll around under an alignment rack while performing the work. A change of jobs led me...

I use a wall solder gun for all but small items for which I use my digital Weller solder station. https://www.amazon.com/dp/B000VM3PTU/?tag=atomicindus08-20 This will not disappoint. I have two of them, my original I bought back in 2002 and it's still working like new.

My house had a functioning pulse furnace when I bought it in 2009. Just replaced it last year. It was still going strong but the main control board was going bad. That thing caused me to insulate all interior wall cavities during a full remodel to quiet it down.

This topic has been pretty popular the last couple years. Here is a link where some discussion took place recently. https://www.garagejournal.com/forum/showthread.php?t=464567 Search on the forums for polar, eaton compressor, e-max compressors and quite a few should come up. I have not seen...