Search results

Can you back up and tale a picture of the entire opening? Based on your description, it appears that the "beam" is built down for dimensioning the door opening... What was immediately over the top of the rotted section? Trim? Siding? Regardless, Replace the entire section. With today's...

check local fire code for all the specifics that they require. ANY "fire rated" door will do.... I have seen MANY variations during my inspections and calls into businesses. Steel doors (hollow or otherwise) are your best bet...

Shutting the water heater off at the breaker is only damaging if you consider that a breaker is not designed to be used as a switch. If you do this often, one MAY think of adding a seperate switch at the water heater. Occassional use of the breaker in that manner isn't too much to worry...

Join Date: Sep 2010 Posts: 7 Re: Need your $.02 on design -------------------------------------------------------------------------------- SO, phase two of the cantilever design: Attach a channel to the cabinet side rail or top rail (underside counter top). Within that channel, you place...

SO, phase two of the cantilever design: Attach a channel to the cabinet side rail or top rail (underside counter top). Within that channel, you place bar stock or tubing that will slid out to support the tray when upright... it doesn't have to be full length since the tray is solid metal. As...

I messed around a bit with a cantilever slider type of design. When the shelf/machine is at bench top height, simply push it straight in to the top (travel is about 5"). Accomplished this by making the 4 upper pivot mounts solid studs, sloting the arm the platform hangs from by 6." Weld...

I ordered mine directly from VIDMAR. They are the newer style, but now ALL cabinets match. I have restored 5-60" Vidmars from a garage sale... paid $25- 80 for each one.... LOVE THEM!!!!

Looking for a cast iron table to attach to my JET disc/belt sander. Doesn't have to be Jet. Just need to be able to make it work.

I have what is now known as "VIDMAR ROW." ALL are garage sale finds, not one more than $200, most in the $25 to $50 range!

Just bought a JET JSG96, assembled machine and found missing cast iron table for disc sander... went back to dealer, BANKRUPT and closed! Jet wants $300 for individual parts...I would love a complete ASSY.

I am looking for a cast table for a JET JSG96 Disc/Belt sander. Jet wants $300 for each individual piece.... I am looking for a complete ASSY. Thanks!