Search results

Has anyone been able to get the code MILW20OFF to work? I got the same email but it doesnt work for anything from Factory Authorized outlet as far as I can tell.

I'm curious as well, where are you finding them cheap?

I use one of these, just open it and throw them in, it will hold 3 or 4 respirators and it is airtight. Also works for my pet food lol https://www.amazon.com/gp/product/B007RBB662/?tag=atomicindus08-20

On hard to seat beads I have run a long air hose to the tire and pumped it from a distance till it popped on, and I also hid behind a block wall just in case ;) I have had quite a few of them not pop on till 90psi, never had one explode yet.

I have sprayed probably 25 gallons of this stuff over the past few years, everything from spot repairs to whole cars for a dealership. It drys quickly and can sand and buff it the next day after spraying it...

If there is I dont know, I just bought those cause they were cheap at $9 for a box of 25.

Got that one from Ebay and it fits, thanks.

Hard to tell from the picture but thanks, I may order one of those. The is a picture of the disc, next to a TSM metal one that I already have mandrels for. The mandrels look the same, the hole is just a smaller diameter on the one for the metal mount.

Im sure they can be run on either a 2 or 3", the mounting hole in the center is just what doesnt fit. as these discs are a TS plastic button which is different than a TSM which is the metal button. I have some of the TSM mandrels and they dont fit the TS.

I was leary of trying that one as I bought this one already and it does not work, the hole inside it is too small. https://www.amazon.com/gp/product/B000TBLC5C/?tag=atomicindus08-20

I bought some of these 3" discs https://www.amazon.com/gp/product/B07HZJPR29/?tag=atomicindus08-20 I cannot seem to find a 3" mandrel for them? They us a TS plastic button attachment. Anyone know what mandrel will work with them?

It is wired with Romex and here is a pic of the outlet. I think I am just going to put a plug on the Tesla charger and just plug it in when I need it, seems like the easiest way.

Yes it is a 60 amp outlet and 6g wire, I installed it when I built my Garage. This is the outlet https://www.amazon.com/gp/product/B00271GXA6/?tag=atomicindus08-20 I have an adapter to plug my welder into it. https://www.amazon.com/gp/product/B07CMQM2L1/?tag=atomicindus08-20 this is the plug...

I have a 60amp outlet with 6g wire that I use for a powdercoat oven and my Welder. I'd like to connect this wire to two devices, one outlet for my welder/Oven and one for my Tesla wall charger. They would not be used at the same time. I am looking for ideas on how to do this correctly. I see...

Im not sure if the Performance plus are different than the pro ones that I have but I remember compressing them to put them on. Try doing that and see if they work. I think I used some long clamps to hold them compressed enough to get in place.

They were a little tight to get on but have been working fine.

I have the Blue Pro series as well and went thru the same thing with Newage, they couldnt tell me or send me a strut. They did help my find some online though. I bought these and have replaced 3 of them so far and they work fine. https://www.amazon.com/gp/product/B01CMI5ZE8/?tag=atomicindus08-20

Came home from work yesterday and it was all clear in there, today it is clear as well. The unit has been on the whole time. Not sure what it was for those 2 days and is a mystery.

I dont know? There is no smell and the heat is still working OK.

There is no residue on anything in the Garage, I also dont see anything coming out of the blower.