Search results

The chart you link seems to say 12 or 10ga is needed for 25ft for a compressor, though all the charts go off of "amperage rating", which is much lower than their chart (listing air compressors at 16-20a) Also, it seems a simple air hose upgrade may be easier than worrying about an extension...

Didnt even think about doing a volt meter, or my distance from panel, if I am being honest... Not that I doubt the start up current is higher, so I dont know if I will be doing that. My thought process was: 1. I have a 25ft hose that I was going to use for airing up tires. I have cars that...

Thanks all. I am aware of the spike in current on start-up, and as noted there are lots of appliances with longer cords running without problems too. The same outlet I will be using (not at the same time, of course), also has my larger (Husky Pro/CH VT6315) compressor plugged in, and it is...

Mostly because I already have a 10 or 15' 16-3 cord in the garage, along with a ~20ft one from a damaged 50' cord that I put new ends on (should have just bought a new one in retrospect, based on the cost of the ends...), and I thought it might be enough. Just seems odd to use something rated...

Im sorry if this has been asked and answered, but I went through pages searching and didn't quite find an answer. Recently purchased a California Air Tools 5510SE for basic inflation duty. Motor is rated at: 110v / 60 hz * Low Amp Draw - 8.5 Amps Manual says "do not use extension cord"...

Neighbors sue disabled garage enthusiast http://www.capegazette.com/article/neighbors-sue-stop-auto-repairs-harbeson-home/114001 http://jalopnik.com/awful-neighbors-are-suing-their-neighbor-because-he-wor-1787769218 Saw this on Jalopnik, and found it interesting. I do not know the man, and...

Width will be about 275mm, they are usually very close there. Height will be about 1-1.25" less than advertised when on the ground on a vehicle. For those that dont want to mail order, you might check with your local Discount Tire. Mine worked with me on price on a set of wheels and tires...

None within 100 miles for me. Nice find though, OP!

Conveniently, the 1" hole dozer is $8: http://www.homedepot.com/p/Milwaukee-1-in-Hole-Dozer-Hole-Saw-49-56-9609/202327744 So a complete kit is $40, and now you have 16 pieces.

They have already done a warranty exchange on the item, costing them $. Why would they then sell the item for you at 1/2 (or less) price, and provide you with new batteries, and give you the exact same warranty benefits as someone that paid full price for the tools?

Searching 80300PD on Yahoo returns this result from Tooltopia, appears to be ratcheting set: http://www.tooltopia.com/kd-tools-80300pd.aspx "1/4 Dr SAE/Met 6pt Std & Dp Skt Set, 51pc w/ Ratchet w/FREE Ratcheting Set, 12pc "

Yes, and I brought that up in my conversation with them. The whole "zoro is a subsidiary, shipping and stock is direct from Grainger's warehouses, should have a packing slip with Grainger's name coming to my house", etc. That did not change the answer they gave me on the phone. I went...

Interesting, makes you wonder why the mix up and why they tell callers "no, Zoro wont work", and then send the rebate anyways. Oh well, either way, I have a welder, a rebate in my bank account, and a sold spool gun that agrees with everyone else (except Miller when you call in) saying it does...

Definitely, but seems to be a low risk now. Millers CS = very helpful, but my guess is a third party company is handling the rebates, as they dont seem to care at all about Zoro :dunno: :willy_nil

Thanks to those who are calling for info - I have been keeping an eye out for an impact set, this is looking good!

There are a lot of those that have received the rebate. I dont understand if you are actually looking to buy, or just posting to try to cause some sort of panic or problem? Note - my posts in this thread detail my phone call to Miller about Zoro (they explained they weren't an approved...

Anyone know if unbeatablesale.com would qualify for the rebates?

I think the almost 1000 posts in this thread cover it pretty well: http://garagejournal.com/forum/showthread.php?t=294389 I thought this was a whole new deal thread!

Yes, they will - I bought a bit over $400 in extras (Zoro pricing, pre-discount). They did not seem to worry about discounts applied. My total, including sales tax, was a little over $1300 AFTER the 30% off and sales tax were added back in (~1700 before discount was applied, a bit under $1200...

Yes, 2 different rebate forms: Standard form for $400: http://www.millerwelds.com/landing/build-with-blue/files/pdf/Build-With-Blue-Rebate.pdf Rebate + Spool gun form: http://www.millerwelds.com/pdf/Spoolmate_RebateFlye.pdf