Search results

  1. 1

    Air compressor aftercooler piping

    I used hydraulic hose
  2. 1

    Oil change on cold engine

    do it cold, just means you can have another beer while it is draining
  3. 1

    What happens after I cut my finger off?

    Thank You Bogie! the only other thing I can add to your post is to write the time down when the tourniquet was applied above the lost area
  4. 1

    Lets see your workbench

    this is one of my favorite threads, thanks Speedingpenguin!!
  5. 1

    Breathing air from a compressor

    by the way I have also been filling bottles through the many different systems since 1998 be it a Honda gas multistage compressor that would take atleast 20 minutes to fill one bottle, diesel power systems that were able to fill a bottle in 10-15 minutes or 3 phase multi stage compressor systems...
  6. 1

    Breathing air from a compressor

    Yes! I’ve been a fire fighter since 1996 and have used 2216, 4500 60 minute and 4500 45 minute bottles in my career. Your stating about being a dive instructor and thinking about a 30 foot depth being a consideration let’s me know that you don’t understand that 32 feet is just one atmosphere of...
  7. 1

    Breathing air from a compressor

    ha ha you really want to question a firefighter about how long an scba lasts?
  8. 1

    Any advice on DA Polisher

    another porter cable user, though I did recently get the adjustable speed dewalt polisher
  9. 1

    Patio cover build

    instead of attaching it to the house build a separate structure and let the roof of the structure overlap your house
  10. 1

    Car lift you can set pinion angle, and adjust suspension at ride height?

    I have seen some adapters for two post lifts that allow a two post to raise the vehicle on the tires. I’d be concerned about raising the rear end to ride height without something preventing the front end of the vehicle from pivoting on the front lift points. I’m thinking of you having a see saw...
  11. 1

    Introduction as a new member

    Welcome and Happy Veteran’s day!
  12. 1

    Granite countertops for workbench?

    granite is nice for a very flat work surface, I imagine granite being like tile for a garage floor as long as the subsurface is stout it will hold up fine
  13. 1

    Measuring out for a lift

    one member here posted a picture of their two post mounted so the hood/trunk of the car faces the back corner of their shop, looked like a great idea if your building layout allows it
  14. 1

    Hardie panel installation

    I used a razor knife to score my hardie board then it snapped cleanly over a straight edge
  15. 1

    Absolute must have in any dream garage...

    friends with projects as cool as mine
  16. 1

    TV mount over brick fireplace? Any tips?

    I mounted my tv “high” upon a wall in my living room. When the kids walk back and forth or stand in front of the **** tube, I can see over their heads.
  17. 1

    Needing ideas for cooling my shop

    put a sprinkler on the roof
  18. 1

    Bendpak installation question

    looks like it wasn’t installed correctly, that kink shouldn’t be there and you had to level the lift
  19. 1

    "Hybrid" heat pump water heater recommendations

    my geospring stopped heating with the heat pump this week, glad I got the 10 year warranty
  20. 1

    Riding Mower Battery Life

    I keep a solar charger on mine that I got on sale from target? no more pushing the mower
Top Bottom