Search results

A draft of the manual has been released: https://drive.google.com/file/d/1LZehFx97iPImSiR_6lCwzECqDGK2gH4r/view?usp=sharing

Used, thank you!

Lista does have stainless steel tops available. For a similar size cabinet to that Epiq cart, there isn't an exact size match, but you could get one slightly wider or narrower. You'd want a Model 750 (41.5" H w/6" caster) in the EW (34.25" W) or HW (40.28" W) width. These are 28.5" deep...

Your site backend is on Shopify, right? This plugin might let you set up a one per customer rule https://help.dashcheckout.io/article/57-setting-up-order-limits-cart-limits-in-shopify

😲 Was not expecting those 5" long nose eagle grips! Guess I'll be staying up late to try and snag a pair on E-day.

I'm looking forward to messing around with 3D printed tooling once mine arrives

The first 25T was complete on May 21, they should gradually be making their way out into the world now https://forum.langmuirsystems.com/t/update-on-the-titan-25t/36728

Belle Vernon, PA. Most Craftsman abrasives at least 50% off. 6" PSA discs were down to $2.82 from $11.38, couldn't help but pick up one of each grit.

Belle Vernon, PA. Seems to be some assorted discounts on Bosch drill/driver accessories. I snagged these step drills (Bosch IMSDC002)

Malco's now-defunct USA-made Eagle Grip pliers are the new gold standard. Buy them while you still can: https://www.harryepstein.com/search?q=eagle+grip+malco&options%5Bprefix%5D=last&x=14&y=12 (It is rumored that Snap-On bought Malco's tooling and is going to move production to one of their...

Looks to be about 18" or so to me. Though if you move the backstop fingers to either side, as long as your sheet fits between them you could bend any length to at least 90 degrees (within the limitations of the press tonnage and overhanging weight of the sheet/plate, at least for the first bend)...

I'm planning to put a deposit down. I've had the fantasy of designing and building my own CNC press brake, but there's no way I could make one up to my standards for less than the $6K of the fully optioned Langmuir. Seems like the right time to buy as it's only going to get more expensive. It's...

This Delta Rockwell 15-655 drill press spent its life in the Carnegie Mellon University School of Architecture woodshop. It appeared on facebook marketplace last August, and for 100 bucks I couldn't pass it up. With a 3 phase, 3/4 horse motor it made a good candidate for a vfd convertion...

Buffalo 4 gang drill press - $300 - Flemington, NJ https://www.facebook.com/groups/144869796130617/permalink/1287542078530044/?sale_post_id=1287542078530044

https://www.langmuirsystems.com/titan25t Next chance to put down a deposit is January 15th. This is very tempting!

Yeah, SO cord with strain relief is what they have in our machine shop at work so that's why I was initially thinking of flexible solutions. However, I decided to use what I had on hand which was a bunch of EMT. I believe I have satisfied the support requirements of 358.30(A). Though this will...

Acquired a lathe recently. The lathe is 5 hp single phase, so I'll be direct wiring it (no plug/receptacle). Based on where it is located, I'd like to bring the power in from overhead, as shown in my crude diagram below. Red square will be a 4" sq x 2 1/8" deep box mounted to the the ceiling...

Belle Vernon, PA Kreg router table switch

Lowes now has similar pricing to HD on the GJ forum-appointed DeathLadder™ Pretty much all Ideal tools in the electrical aisle are on sale, must be doing a second round of clearance, lots of stuff half off or more. Some Greenlee items are also marked down - mostly auger bits. Also saw the...