Search results

only if they get dull looking. I'll ad a couple of coats in hopes of the dust just falling off!

Painted all boxes and conduit gloss black

The problem a lot of us have is we live in older homes and the concrete isn't 4" and we don't know the strength of the concrete. Had an estimates to remove some concrete and install large cement pads were from 4K - 6K.

Personally, i think those are to tall!! AL

I agree! Changed out my large box with AM wheels that were around $100 for a set of 4. That was 5-7 yrs ago! When we moved, i purchased 3 similar sets and placed them on what previously was large metal cabinets! I did this so when i have the floor painted, i wouldn't spend days unloading...

Finding good help is all but impossible. Yrs ago I retired at 55 and was enjoying my retirement and projects. Had a friend that needed her bathroom redone it was a gut job. I got everything out of the bathroom and it was her responsibility to get rid of the debris… Worked out great and was a...

Other reasons for a 4p lift is you can use it for tractors, and my bobcat!!!

Going back years ago to the days of Corvette Bloomington Gold there were several vendors that would show up every yr to install muffler systems. The individuals performing the job were employees and you would see them yr after yr. However, time has passed, and things may have changed over the yrs.

yup! Twice!! Rent a low flat bed trailer and back it up and under the lift! As then as you lower the bed the 4 corners will come up! Secure with straps and away you go! The only thing you may have to worry about is the height of the post, along with the cable end coming through the top of the...

That can be a problem on older homes where the wire doesn’t extend beyond the box!

look at installing heat alarms in multiple ceiling locations. will give you some notice that something is happening!

Ask the boss to show you how to take the tire off!

here is a thought! A friend of mine upgraded his garage cabinets. He found hid oldest, sad looking tools and drilled holes in them and installed them as handles on cabinet doors and drawer handles! Really came out looking sharp!!

Not a problem. Just get a med to large router, a couple bits and away you go! In our previous house did over 150 ft. took a couple of afternoons as i let the router cool down!

I’ve started using white duct tape. Using a blk marker the description really stands out. Also it’s very convenient to cut the tape to size for the container size being used

The one thing I would consider is the main garage door DOES NOT face the street, so anyone driving by can see what's inside !! AL

Socket replacement is lest costly and quicker !!! Case in point… we had a church member had her fridge go out. Turned out it was a CB in the electrical panel in the lower basement level. They had lived there over 40 yrs and never had to look into electrical panel. We changed out the CB and...

Should you choose this option, grind a small area that is small, then drill a small hole, doesn't have to be deep. just enough to be able to drill the hole larger in the future, and remove a bit to back out the screws!

Splice new cord on! On one cord I used a hot iron on low heat and flattened it out!!

I’d go with a gloss paint as it will reflect light back better than a flat, and is easier to clean!!? As a FYI - look at all the HIGH end repair shops as they are all painted white !