Search results

I've seen guys break the linkage brackets with those.

If the original line set system was R22 and the new system is R32 the wall thickness may be too small since R32 runs at a higher pressure all depends on what you have now and what the new system calls for.

Some of the older intercity construction the roof downspouts(scuppers) are in center of roof tied into the sanitary making it expensive to do, the storm water run off department(AKA the parking lot police) only come around to measure the parking lot size to collect water run off fees, it's a bit...

But I learned how to weld installing weld on spring hangers on semi trailers.......

I had a shop like that one once I hung the lights on the 45 braces it made a big difference in the light pattern.

Box tools at Ritchie Bros auction from bankrupt companies.

Gee I worked on a Subaru yesterday that someone used a 7/16" nut and bolt on both sides of the rear suspension. Yep 7/16 bolts will go into 12mm holes. So need a 5/8" and 11/16" wrench. If you do enough rust buckets you'll find a lot 6mm redrilled and tapped to 1/4" 8mm opened up to 3/8" etc.

https://www.milwaukeetool.com/buy-now

Practice, practice, practice(on bolts it doesn't matter on) :beer:

Once you get proficient burning a nut off and not nicking the threads on the stud of a exhaust manifold the torch becomes the tool you grab.

Well the 1/2" drive set I bought of short impact sockets on a rail has skips.

You would really need to see the back side of the rotor as that's usually the worst side. That said I think even in NY that is more marketing then actual inspection rules. Subjective term in that blurb is "inpairs the braking system." Pa DOT has specifically told us not fail if the pads are...

Cummins makes smaller gasoline/LPG/NG engines under the Onan banner I'm surprised we seen them migrate into the small engine supplier market.

Buy from a supported retailer for warranty support.

Seeing the image in the ad tells me everything I want to know about that tractor. Guy didn't bother to spin the buckets down so the water runs out when parked, then couldn't be bothered to dump the water out for the sale picture. Left outside in the sun since new never covered, I'd bet the only...

Only problem it's always the same size socket you lose/break......

From the side shot I see it has pneumatic tires :) from the rear it looked like cushion rubber.

How well does that lift move in the grass?

There isn't a day goes by that I have a customer that doesn't understand how tags work.. I get "you mean I have to pay for tags too to get my car inspected" " They never sent it to me" did you renew online "Yes" You needed to click on the button and print it out. "I don't have a printer" "Do I...

It took close to 2 years for me to stop jerking my head to flip the mask down after I got my first auto-darkening helmet at work Of course I still had the flip down at home......