Search results

I love it but my first thought is that EJ would roll over in his grave if he saw his tractor that pretty. Spent the night at at his place once back in the 80s on our way back from a pull in Toronto. Quite the genius. Talk about bringing back memories H

Pictures come through just fine H

People have the colour code right and I also like to solder the connections at the pigtails and then cover with heat shrink H

Sounds like you are putting something big into something little. What are you building?? H

That switch is for fuel injected vehicles to shut off the electric fuel pump in the event of a collision. H

A new round file would slot that fairly quickly H

Just so you don't confuse yourself, I think you are on #6 compression stroke. #1 would have both dots at 12 oclock. You have it lined up properly. The crank turns twice for every turn of the cam. This is a moot point, just don't want you frustrating yourself. H

For your truck, stock is fine. Just go pre 1973 stock so you get the straight up timing gear. H

Lots of reading here http://www.truckconversion.net/forums/ H

What happens if you turn the ign key to the run position and the crank it with a starter button on the solenoid. If you do not have a starter button, you could jump the solenoid with a screw driver. Just make sure it is not in gear. I have had some that have power to the coil in the run position...

I had that on a customer's vehicle once. It was the module on the fender. H

I made a grid of 3" channel that is flush with the concrete with provision for the ground of a welder. When you do fabrication, you can weld stands to this grid and everything is level and grounded. Only one cable to mess with and it will stay in place. Makes it easy to screed the concrete as...

We need a "like" button H

Years ago I helped build a church and one wall was "too close" to another house. We put in two layers of 5/8ths drywall and then tyvec and stucco over top. This was an exterior wall in Manitoba and is still fine 20 years later H

Don't know if this would ever come up for you but 40' long will handle some trucks with trailer attached. H

We coated our laminated counter tops with a product from Lowe's that was called stone something. We cleaned the tops and put on a primer, coated it with a sand type mixture and then a clear epoxy over top. Took a few days but well worth it. It is about 4 years old now and standing up well. Would...

I have no windows in the shop and do not miss them at all. They add heat in the summer, coolness in the winter and take up a lot of wall space. H

How big are your vehicles. You will have to keep the doors closed to use the lift. H

The water jacket runs about 165F. The firebox I was thinking of rockwool as it runs about 500F H

I am modifying my coal fired boiler and want to reinsulate the outside. It is 24" in diameter and 8' tall. I have had the fiberglass pink insulation wrapped around it and covered with sheet metal but am thinking about using spray foam instead. I was at Lowes today and just got confused about all...