Search results

Any one have this #62355 1" D handle Impact gun? http://www.harborfreight.com/air-tools/impact-wrenches/1-in-pistol-grip-air-impact-wrench-62355.html Like to hear a "real world" review of it

3 or 4 of "everything" from 1/4" to 1-1/2" Plus 2 of each up to 2-1/2". Angled up to 1-1/2". Metric I keep up to 24mm in standard combo wrenches. But I also work out of a service truck and if you dont have at least 2, you will need 2. I work on everything from commercial mowers to heavy...

I use mine on a regular basis, and I've broken it twice. Look closely at the tips and (if they are like mine) there will be what look like spider web cracks in the tip. Both of mine have broken there, Plus the first one straightened the bend. I'm not the biggest guy around by any means, but at...

I have that same ratchet. When I had my Rep rebuild it it took him over an hour and I ended up finishing it on his truck. He had never rebuilt anything over a 1/2" ratchet before!

I have 2 of the older Emglo Versions of the IR. One is still all original with the Briggs (like I said older!). The other has been canabalized for the pump/fittings and the mount for the engine and pump. I put the mounting plate on a 30 gallon horizontal tank and mounted the pump with a Honda...

Heres the last couple weeks off the Snappy truck. 8-19mm semi deep 3/8ths drive. Running a promo for $93!!! Hard Handle screw drivers (yes, theres one missing in the pic, it was under the hood where I was working). 4 Piece pry bar set, and the 36" pry bar as well! And a 3/8's hard handle...

Does anyone know if the short side locker is still available? I need a place for my welding helmet/boxed tools and dont want the big tall locker. Thanks!

Being that there is more snappy than anything else in it, I figured I would.

Here's the US General box I picked up to replace my triple stack. In its new home in the shop I'm in now. More pics later perhaps. Just got the box settled today.

Around $43 I believe when I bought mine in red.

I've done alot of sandblasting with an ALC 70lb pressure pot and numerous others. Best thing we ever did was run a 3/4" line from the compressor to the blaster. Also, remove the deadman valve, typically unless it is a high dollar (thousands) unit, the deadman makes more of a mess than it does...

Picked up a set of cold chisels with a roll, for 17 bucks list today. Only thing noticed (by my girlfriend) was a misprint on the roll itself.

I would never forsee it being an issue. I work in a powdercoat shop (plus as a mechanic), so I see both sides of the coin here. Just wanted to give an "explanation" of the lack of powder in the corners.

The "poor powder coating" would be caused by the Faraday cage effect. Its an electrical "cage" that you can visibly see when powder coating something in a corner like you see here. Simply because the gun was pointed directly into the corner. The angle of the metal creates a change in direction...

Yes they are. Sorry but they aren't forsale!

First post, figured I should make it a decent one. Been lurking for awhile (few months), since I started comparing new tool boxes. Decided that for now the US General 44" with the additional 7 drawer cab on the end will work nicely. Going tomorrow to get it! Pretty excited. Heres a few...