Search results

If you use a hacksaw, put the blade in backwards, as opposed to the normal set. You can also cut above the mark, and slip a coupling down to the mark, to give you a shoulder to help guide the blade.

Navian makes a tankless boiler, and water heater. For space heating you would want to use....what? Went to school on both at my local provider for sales-service.

Why run the cooling vertical? And why use half or three quarter? I have soldered thousands of joints and you can too. Use 1" minimum copper with 5' lengths connected with a 90 and a street 90. Tink the runs with a block, or something so that the moisture falls back to the tank. Doesn't take...

Do those heaters have a venter motor (forced) or draft hood (natural flow). Get rid of the tees? Don't force byproducts into a tee.

Do not open the drain unless you want it to leak. The sealing washer by now is rock hard and will not re-seal. Your prob. is two fold. Galv. piping on the hot side with a galv. union also. Both are closing up on ya. You will see this when you take those fittings apart. Short term fix-remove...

Check with your water provider to see if the meter has a check valve. PRV's are also common in some areas of Fla.

What is your filter type, and location? The pleated filters will stink after just a few mos. of inactivity (re no air flow). Crawl spaces or damp basements. Start small and work up.

Probably to late since this post started in May, and I did not read all replies, but, the softener discharge piping,(drain) should be separate. By pass the septic tank and wye into the field beyond the tank.

Hey, I am a new guy that has lurked on here for the last couple years. I **** at links and pics., but just wanted to pass this on. As of April 16 2015 all water heater energy efficiency rating will be changed to a new standard. Google 2015 water heater standards. If you have been thinking of...