Search results

With a selection of fittings and adapters for GM vehicles. Other than the glass missing on the low pressure gauge, this set is in great condition. I can ship via PirateShip at a reasonable rate.

With “J” and “M” dies. One slot is for oval compression sleeves, the other is for round stop sleeves. I can ship via PirateShip for a reasonable rate.

Works great, with various software and cables and adapters. For some reason the big keypad reminds me of the early generation electronic cash registers at McDonalds. I used this on a 1995 Chevy K2500, and all functions worked including the ABS activation for brake bleeding. Two “mass data”...

Adapter for master cylinders with rectangular caps, like the mid 90’s GM trucks. Brand new, never used. Price includes shipping.

A six-volume set of manuals. I purchased these from GM’s supplier for FSM, Helm Inc., back in 2010. The loose leaf binders are re-prints but are quite legible. 25 pounds of reading pleasure! $20 shipping, or pick up in Woodbine, MD 21797.

Model #2272, variable speed, #3 Morse taper. 1.5 hp, 115/230 volts, single phase. This is still a current model available from Clausing Industrial. Made in the USA. The paint is faded and chipped but in really nice condition, just one small divot in the table. 3/4” ball bearing chuck...

Extensions for the 30 ton push-puller set. 14” overall length, 1”-14 threads each end. Looks like the current OTC part number is 1109. Old and a bit crusty but fully functional. $16.25 shipping via USPS Priority Mail.

Looking for one of these.

Trakka, made by Tanjant, 54” track, 48” travel. Two magnetic pads. Has bushing for a Thermal Dynamics plasma torch. Bushings for other torches, as well as replacement parts, are available here https://www.tanjant.com/product-category/trakka/trakka-line-cutter/. A bit dirty but in good shape...

17-1/2 ton puller parts. Well used, but still usable. Bar is 13-1/2” long. 1” screw, has damaged area but the nut glides over it. 2 ea. #930E legs, 4-1/2” stand off 1 ea. #930D leg, 9-1/2” stand off pick up, or $16.25 USPS Priority Mail shipping.

Handle for the table lift on a Dake hydraulic press. It was in an auction lot from a shop that had several of the 25 and 50 ton presses. The hub bore measures about 1.05” diameter, transitioning to 0.83” square. Fits in a medium size USPS Priority Mail box, so shipping is $16.25.

This is the motor pulley form a Clausing 4900 series lathe, but it could be used for other applications. Six grooves, 3/8” wide belt, 2-3/4” to 6-1/2” diameters, 5/8” bore. 3-1/4” overall width. Cast aluminum, fully machined with balance holes. Nice shape, no cracks or chips. For...

Hercules catalog #511BO. 3 terminals on switch, “comm”, “normally open”, and “ normally closed”. Rated 20A, 1 hp, 125/250v, water and oil resistant. Heavy cast aluminum top and cast iron bottom, with safety catch. $40. In the “orange” pictures. Duplex catalog #476-S. Rated 15A, 1/2 hp...

Blower with direct drive 1 hp, single phase, 115/230 volt motor, TEFC. Powers up just fine. May never have been used as all of the knockouts in the electrical box are still in place. Still a current item in the Grainger catalog...

This is a larger rotary machine, weighing in at 40 pounds. The shafts and gears turn smoothly. Shafts have 1”-14 threads, 2-3/4” center distance. Unfortunately no rolls. Pick up in Woodbine, MD 21797.

Model BNP 30-2 abrasive blasting cabinet. Inside dimensions 17” deep x 18-21” high x 40” wide. Cyclone separator with dust bag. Foot pedal, blow-off gun, flip up light, on casters. Got a bigger cabinet so time to move this one along. Located in Woodbine, MD 21797

40 cfm @ 100 psi. Based on a Wisconsin VG4D engine, two cylinders for power and two cylinders for air. Runs a 3/16” sandblasting nozzle. A lot of air in a small package. In really good condition, runs great. I got a larger compressor and this one is now gathering dust.... Located in...

OTC 17-1/2 ton push-puller, used but still usable #938 bar, 13-1/2" overall length 1"-14 threaded x 13-1/4" long forcing screw, has damaged area about 1/4" wide as shown on photo, nut spins freely over entire threaded length 2 ea. #930-E-1 legs, threaded 3/4"-16 x 5/8"-18, 4-1/2" 1 ea...

SOLD Not sure how old this is but appears to still be a current model as seen at http://www.diacro.com/benders/hand-operated-benders.php Good condition, only tooling is what is shown (center pin + anchor pin), includes factory stand. $350, pick up in Woodbine, MD 21797.

Early '60's Model 1D Toolmaster vertical milling machine, 40 taper spindle, infinitely variable speed 85 - 3800 rpm, 10" x 42" table, 1-1/2 Hp drive motor. Also has shaping attachment with set of original Cincinnati shaper tools. Attachment has 1/2 Hp motor, 6 speeds. 3 phase motors but set up...