Search results

https://imgur.com/a/3dVdr4i Can anyone tell what model this is from the picture? I don't know much about Bendpak. What do you think it is worth? Is about 5 years old. Thanks Also I am not sure i see the IMG test above my post but i don't see the image... Do you guys see the image?

Hopefully someone knows more about these than me. Looking at a newish scissor lift either a Genie 1930 or JLG 1930ES. Anyone have any experience with these?

Looking at buying a used one of these. Have a roughly 10,000 sqft of concrete to pour for slabs and then additional driveways. https://www.wackerneuson.us/en/products/compaction/vibratory-plates/reversible-vibratory-plates/model/bpu3050a-dpu3050h/type/Description/ That is the model I am...

I have a Delta 1.5 HP Single phase Dust Collector. I have a guy that wants to trade me a new 3HP 3 Phase Dust Collector straight across. Downside Is I don't have 3 phase at my shop. So If I take the trade I will have to buy either a VFD or a Rotary Converter. Whats everyone's thoughts? If...

My IR compressor aftercooler got damaged. It does not appear to leak but took a beating. They are about $350 for a new one. Is this worth replacing? Thinking about not. To be honest I am not real sure what it does. I thought it cooled the air going into the tank however the IR rep tried to tell...

I have 26x40 shop with a game room above. It has a metal roof screwed directly to lathes. I have talked to many insulation guys and got completely different opinions on how to insulate this shop... Here is what I am thinking of doing. Using Bats on the walls of my shop. Using Open Cell...

Ok, So I welded up a bracket for my mini-split to hang on my exterior wall. I currently have brick on the outside and then a stud wall wrapped in osb. I currently have full access to the stud wall. So I can see the osb and my brickis on the other side. My question is what is the best way to...

I have some 120 watt fluorescent fixtures that the inrush current is killing my light switches. Apparently the incoming current, upon being switched on, is too much and kills the switch's internal relay. So my solution is to wire inline a contactor also known as a high power relay. I bought a...

Not sure what to search for. I have a wood framed cabinet door that needs to only open like 70 degrees. If it opens more it hits on a light fixture. I called rockler and they had no idea.. I could use a chain but it looks trashy. Anyone got any ideas? Thanks

Am starting my wiring. I have a 9 T8 fixtures that I am installing end to end that are running perpendicular to my i joists. I have not decided on metal or sheet rock yet on my ceiling. What is the best way to install the boxes? I was thinking of tacking in a board above the flange on the i...

Ok I got 9 8foot long t8 fixtures I am wiring up. I am wanting to be able to switch on 5 of them with one switch and 4 with another switch. I thought about wiring them with one 12/3 wire instead of separate 12/2 wires to save on the expense and labor of pulling two sets of wires. Will this work...

I am about to wire up my shop. I have two fans in the middle of it and about 4 receptacles in the ceiling around it. I am planning on bringing power to the fan and using a switch-leg drop to control it. Wondered if I can use the same 12/2 wire that is going to the first fan to power the recepts...

Got this panel. http://www.lowes.com/pd_286845-296-HOM3040L200VP_0__?productId=3366842&Ntt=200+amp+panel&Ns=p_product_price|0&pl=1&currentURL=%2Fpl__0__s%3FNtt%3D200%2Bamp%2Bpanel%26Ns%3Dp_product_price%7C0&facetInfo= and was wondering if there was a diagram I could print off before the install...

Built a shop and have about 110 feet of 4" pipe running down hill to a sewage pump. Drop is roughly 10ft. Looking at getting this 4/10th Liberty Pump. Then pumping it with 2" pipe about 15' horizontally then a 90 degree and an additional 5' uphill. Rise is maybe 2' Will this pump be able to...

Situation I got an 2gallon tank that has a drain valve on the bottom. I am connecting it to a valve that is slightly lower than the bottom of the tank but the hose between the tank and valve is routed above the bottom of the tank. Will it drain the moisture off properly? At first I though no...

Ok, Not sure how to work the title, but I have an aluminum bracket that is 7" long that I need a few machined like. Recommendations on having this done?

Looking for a couple of tall tack stands to hold up a rear axle on a gear swap. Jeep will be up on my 2post. Any recomendations? Saw what northern tool had and was thinking maybe blackhawk, Saw a Sumner somewhere else, but I really know nothing about these... Thanks for any help.

Can I fit all of the wires needed for the above? What all will I need for them? Thanks. I was thinking I could run 3 10gauge for the 240v & 6 12guages for the rest, but I was not sure that is what I would need...

I need a single gang waterproof light switch. Anyone make one? I am not wanting to use a switch inside a box. I found one in the uk but none state side. Thanks

Ok, I know this is a big no! With that said let me see if anyone has any suggestions. I have a 3/4" pipe ran under my drive way from one side to the next. It is for power to a Viking F1 Gate operator. Turns out that with some cat 5 at the operator I can open and close the gate with my computer...