Search results

Does anyone know of a Aerosol Nozzle w/ 19.69in,360 Degrees Extension Hose for Male Stem Spray Cans that will fit a RUSTOLEUM paint can stem? I bout the one listed below and the nozzle hole that goes over the male stem is to big. Thanks...

I am cleaning up the rust under my truck. I been wire brush on a grinder then using EASTWOODS Rust Converter and there other products. I was to to make my own rust converter using phosphoric acid and alcohol. Is this good to use or just stay with Eastwoods converter? I am going to need a lot...

I have a piece of 2"x2"x1/4" mild steel tube I need to drill "14", 1/2" holes straight thru. I only have a 1/2" corded and cordless drill to use. I have tap magic to use but need to get good bits to use. What brand bits should I buy Drill America? I figure I need 1/8, 3/8 and 1/2" bits. Also how...

I AM DOING SOME WIREING ON MY TRUCK AND LOOKING FOR HEAT SHRINK TAPE TO GET THAT NIS GOOD. mOST OF WHAT i AM DOING i CAN USE HEAT SHRINL TUBING BUT SOME AREAS NEED TO BE TAPED/ lOOKING FOR3/4" OR 1" WIDE.

I am going to be doing some work on my truck and would like to take the chill off the garage. I have a kero bullet heater but the garage is attach to the house with a bedroom above it. I can not use it do to the smell. Are propane heaters any better? I see the little bullet heaters and the ones...

I have the HUSKY 56" tool box and love it. I just wish some of the draws were deeper. I am looking fot a 2 draw intermediate middle box that might fit it. I would like the draws to be 4" deep. Does anyone have any suggestions? I would not mind if it was 2 boxes side by side to fit. Thank you

Hi all, I am looking at buying a Vevor ultrasonic cleaner. Right now they have them on sale. I am wondering what size to get as it comes in liter size. My main plan is to clean mower and small engine carbs. I do not to small in case I need it for something bigger but not a big unit. Any advice...

I need to weld some patch panels in my truck 18ga. I have welded much heavy steel 1/4"- 5/8" but nothing this light. I just got a Hobart Handler 135 110v unit. Should I use flux core or gas shielding wire? I never used flux core before. The machine can do both and I have mix gas from my large...

There is a guy in town selling a Hobart 135 mig welder. Problem is the torch/sting side is missing so would need to get one. Is there any way to test that it work without it> Using a test meter may be? t does power up. Not sure what it might be worth? I do own a big Miller 225 but do not have...

The torion spring on my garage door broke. It is a 8x7 door with 1 spring. I bought the same spring, installed it and restrung the cables. Now the dor opener keeps erroring out the the door tracks to 1 side binding. I readjusted the cables several times. I also took apart, cleaned and lubed all...

I am looking for a drill bit extension that can handle a 3/8" bit like 24" long and if a little flexible would be great if anyone know where to get one? I have been looking but most are for hex bits. I bought some round wire brush to remove rust on my truck. I am looking for the extension to get...

I need to heat a 3 car garage this winter in NC. I will be working on my trauck and do not need it real warm. I have a 150K kero bullet heter but it is mt father-in-laws house attach with a bedroom above it. So they will not let me use kero do to the smell. Any sugestions? It needs to be...

I am replacing the exhaust manifold on my truck that is leaking. Got the manifold off and there were 5 broken studs. Been spraying with KROIL for a week and got 1 remained. The others broke off inside about 2-3 threads Been watching videos of guys welding nts on to remove the. I am wondering why...

I have to replace the exhaust manifold on my truck this week. It has aluminum heads with M8x1.25 stud holes I need to cleam. I have been reading threads on the CRAFTSMAN 48 pc master rethreader but it seems they no longer make it. Looked at other kits and they are $75+ which I do not have right...

So I have used angle grinders for years and never had an issue. Now maybe all this time I have been using it wrong. MI just got the mini DEWALT 4-1/2 corded grinder. I put a cutting disk on and it will not get tight, the disk is to thin. Tried a different brand and same thing. The way I do it...

Anyone know where to get the craftsman easy read sockets? I looked at LOWES and can not seem to find them. I am looking for 1/4" deep socket with the easy read writing on them. My eyes are getting bad so need bigger writing. Thank you

I bought a coolant pressure tester kit from Amazon a few weeks back. I is pretty nice but it leaked air at the quick disconnect. I returned it and they sent me another, same issue. It has the adapters to fit all my cars. Can anyone recommend a test kit that won't leak? I will not be use much so...

Looking to buy a inspection bora scope. Will not be used much and do not want to spend big bucks on it. Any recommendation? I had bought one off Amazon that plug into my phone but it was junk.

I have a old Genie garage door opener on my shop. The safety sensor broke. Is the a way to bypass them? I am the only one That is in there so not worried about that. Do not want to spend the money on a old unit that still works.

I am looking m to get a solar battery maintainer. I have 2 plow trucks that sit most of the time. The batteries are sometimes dead when I go to start the. One is a Jeep and sit in front of my house. I would like one the plugs into the cigarette lighter and can just be left there with out...