Search results

I have a 10' x 16 (450lb) garage door and put in new torsion springs. There is 3/4" gap at bottom on left side (floor is level). The torsion shaft is a Key way type so the cable drum has a key in it. Watched several youtube videos on how to level it but not real clear to me. 1. Take a couple...

I'm putting together 2 solid shafts (8' each) together with a cast iron coupler. When I took it apart, each side (shaft) had 1/4" key going into the coupler. I'm wondering if I can use 1 key to span both shafts, wouldn't it be stronger, since it wouldn't allow any twisting of the shafts...

I have a 16' x 10' 450 lb door. I have the drums/cables/shaft (single) 1" hollow 14Gauge/T springs (2)/ and end brackets, but no center bracket. What type of center bracket should I use? Do the springs bolt through the center bracket and each other? Any links would also be helpful. I live in...

I'm updating a beat up garage door (door panels are fine, it's everything else). Original size was 16' x 12' and I'm resizing to 16' x 10'. Took of Torsion springs and shaft and horizontal track. Replacing them, panels are 90 lbs a section/450 lb door. The springs are being made for the...

Screw Sizes for 14 gauge garage door hinges I'm need screws with washer heads for 14 gauge garage door hinges. The hinges I'm replacing all use a 7/16 socket, but some don't have the washer heads. Went to the hardware store and they don't have that size. Guy at the hardware store says use...

Moved into a fixer upper, garage door is 12' X 16' with 6 panels (2'). All the hinges next to the track are #1, some bent, one broken. I want to replace them but the diagrams I see are for smaller doors. From the bottom up, which panels will be number 1, which number 2, and which number 3...