Search results

Well got the compressor back up and running and then within 5min of starting to blast again the vac on my blast cabinet decides to let the magic smoke out. I tried to wish it back in but no luck. So to use a shopvac and a water trap until I can afford a new vac system unless I like the way...

That's for sure. Luckily I wasn't spraying just sand blasting and I got it shut off quick. Although I don't have a spare. Campbell hausfeld was real good and had parts in Stock even tho it's 24 yrs old and will have them tue. $140 for new rod, crank bearing and a couple gaskets. Cylinder...

Well my compressor blew up and has halted progress. New parts are ordered and on the way should be back up and running Wednesday.

It depends on what I'm doing. Something like this that will see some use and it's all bare and not putting my normal 3-4 coats of base and 3-4 coats of clear I want to make sure I have a good base the body shop I just started at will etch any bare metal spots under the primer.

Got most of the drawers blasted. Little bit of grease left to clean out of the slide tracks and reblast them spots. Next onto some bodywork smoothing out the fronts and such then some self etch primer followed by a coat of 2k primer and some topcoat. Anyway here's a few pics.

Possibly lol still not completely decided yet but leaning more towards it. Possibly doing a blue pearl mid coat over it also with either blue or black trim.

Thanks for the advice guys. I do just so happen to have a 40"x40" blast cabinet so I started to blast the drawers today. Got about 16 of the smaller ones done inside and out have 11 (of course all large ones) left. There was alot of nicks that were rusting and paint around them were bubbling...

Thanks for the input guys. I tried scrubbing with multiple things and nothing was taking this grime off. Thinner didn't work neither did prepall and there's some dents and dings I wanna knock out so it looks like I'm going to repaint just not sure on color yet.

The guy was a body man but this was his home box. All the slides are good no rust or even corrosion at all just need to clean all the crusty grease off of them and re lube. If it does get painted it will be ppg base and clear job as I'm a painter by trade and I have 3/4 gallon on the shelf...

Long time stalker of the board been a while since I've been on here so busy with others projects haven't had much time. Yesterday I picked up this vintage 1979 kr2105 with 2 kr274 side boxes for a roughly 600 clams. It's kinda crusty on the outside but the slides don't have any corrosion on...

that happened a few weeks back at work. the exhaust was covered in snow due to it being on a wall above another roof the snow drifted over and covered it would blow back thru the burner tubes and shut off.

they are from menards with a tool shop brand its a 160pc set got it for 16.99 decent variety for the price and the case is metal

don't usually take pictures of the tools I rarely get as they 9 times out of 10 go straight to work. heres some things I got for xmas. nothing high quality but their just for home use.

not new but new to me. a guy I know has been sick and out of work for a while and is selling off all his machine shop equip. picked up 2 40ton shop presses, a famco 2ton arbor press, royobi chop saw, dewalt 4 1/2" grinder and a delta dust collector for the sum of $300. presses need new seals...

sorry i didnt mean to piss anyone offffffa (jeff dunham as peanut) i have never used racedeck or any other tile products as these i have only seen pictures. like i said i got these tiles for free and only stated what i have seen on the comp. i wasnt trying to do a comparison or product...

well heres as far as i made it and ran out of both orange and gray but still have black left over. the orange goes just to the edge of the pic. the black on the left in pic 2 will be replaced with correct gray when i get some more ordered along with the rest of the orange and some transitions...

Thanks by the way guys. The construction seems to be like racedeck but these have 6 tabs I just put down the fabric and man it does make a difference used the cheap stuff from wallyworld and put down 2 layers.

Ya I'll put them up not sure when it will be though funding is tight right now. Hope to sell this truck off and have a little left over cash once I put up my shed then I can do the floor. All I have left is the 4' row in front of bench and 6' x 8' area by tool box and drill press.

thanks for all the welcomes guys. im upper central bout 2hrs south of chicago. heres a 2007 street glide i did the body work on, i did not do the flames but my airbrush guy did and then i cleared and buffed. heres a 71 duster i did in factory winchester gray.

wanted to stop by and say hi to all those here. names ryan trying to start a small custom auto business and make my shop something respectable. have been lurking around for a while and decided to say hi finally. lots of great info on here from the little i have seen already and cant wait to...