Search results

Thanks! I've wanted to do that for 3 years now, finally did it. Then sold it...I got my asking price for the jeep, then nearly blue book for an overpriced 13 year old truck. Couldn't say no since I don't plan on driving it very much anymore. Thanks! And I finally put up some garage signs. I...

Not sure how I feel about a dude posting a "Shaved 14" in my garage thread...:headscrat Anyways, the truck turned out pretty decent looking:

Been awhile since I've been on here. Got a few more projects done in the garage. Really got into cycling this year, so I hung the bikes high on the wall for maximum floor space, thank god they're aluminum frames (now I want a trek road bike): Half doors for the LJ came back from paint...

Still haven't got the half doors back from the paint shop, but I had time to modify a wall mount bracket for the half doors. A first I really didn't care how it looked, but after putting it on the wall, I'm a little hesitant about its looks. I may or may not change it. And I'm...

And today, I got around to hanging the family bikes up for winter storage: And since I was on a roll, I put a hanger up for the large ladder:

Last weekend I finally got around to aligning the hinges on some half doors for my LJ: What to do with the hard doors?: The half doors are currently at the paint shop. I have a bracket on the way to hang them by the hinges on the wall.

Wow, been way too long since I updated this. Couple months ago I got around to hanging up my regular use tools. What a mess: Start of the progress: ORGANIZED!:

Thanks, you're product worked great!

Big Maxx 80,000 BTU Furnace I've already shown this in the first page, but I installed an 80,000 BTU Big Maxx natural gas furnace. I really didn't get to use it too much other than keeping the garage above 50 degrees before concrete. Since freezing temps hit the great lakes region a couple...

I've really been lacking at updating this thread. Anyways, the air hose has been put up on the wall: A key locker has been mounted up, not the perfect color but my wife bought it for me as a surprise: I also finished painting the press:

SAS full size chevy's are definitely sweet. I'm betting it's an easier project than what's going on under the hood of that buick. The vise isn't in use in the pic, but here's the idea of why it's built the way it is: Thanks!

The intermediate hose between the compressor and hose reel is cut and fitted. I need to get a 90 degree fitting for the reel and some conduit clips to get everything cleaned up: Pics of the compressor i'm using. I picked it up for $125 two years ago. The compressor still had all the tags on...

Lot of awesome in this thread, but this I really like. I need to add a folding work bench to my own garage. Nice work on all your projects.

Thanks for the compliments on the LJ. The build will start before too long. Have to decide between GL4x4 or PBB for that. Back to the garage; I got the air hose mounted. I'm going to use a short hose to go between the compressor and the tank with a fitting, because I do plan on putting in a...

I got an ugly old press today on a trade. Plans are to clean it up, paint it, cut steel blocking for the table, and put it in the corner for pressing bearing and bushings.

I got a hose and reel in trade, still have to clean it and mount it up, but it seems to be in good condition: Also got my hands on something to put those dana 60's in, a 2005 LJ: Not sure if it'll be this fall or not, but my yellow jeep will likely be sacrificed for parts. I've been...

Vise is mounted and all the excess fluid film has been wiped off. I cranks in and out very smooth. I used 5/8" allan bolts to mount the vise for a little cleaner look.

My progress has slowed down due to wheelin a couple weekends ago, got a little hairy out there and at the end of the trip I destroyed the 9 inch rear: Anyways, finally have the workbench positioned on the wall: Couldn't find any corrosion x locally (didn't look hard), so I got some fluid...

LOL, no kenworth, just jeep parts. Got the bench looking good, just giving the paint time to dry a little more: Been cleaning up the bench vise. May have came from the railroad as it has been welded down for use at some point in time and a tag has been put on it: I've cleaned it...

Thanks! I'll be doing a little more welding to this bench. Adding some 1/4" plate on the bench vise side to handle some hammering. The top of this table and the other one is 11 gauge. Also started wire wheeling the bench vise, still got to tear it apart but I wanted to start cleaning it up...