Search results

same price on Amazon https://www.amazon.com/dp/B015SR9I4I/?tag=atomicindus08-20

The Viair brand has a big following: https://www.amazon.com/gp/product/B005ASY23I/?tag=atomicindus08-20

https://www.sears.com/craftsman-48-pc-sae-metric-thread-restorer-kit/p-00942275000P# Made by Lang/Kastar, exact same set sold by snap on and mac

These are really nice, costco has a rebranded blue version for around $30: https://www.amazon.com/dp/B0064EICKG/?tag=atomicindus08-20

There is no way to turn off a permanent magnet. The welding mag clamps work the same way, by moving the magnet away from the surface. Sounds like you are talking about a powered electromagnet. I think a basic sweep covered with a small bag as mentioned earlier would be most practical for this use.

27" long with release, length might be nice to reach around and under tools.. - https://www.amazon.com/dp/B003J3CW1U/?tag=atomicindus08-20 little handheld with release - https://www.amazon.com/dp/B009ASY5MW/?tag=atomicindus08-20

dnschmidt is correct that the JIS standard for screwdrivers is dead. Others are citing they still see JIS screws on current production, which is also correct. If you want a real JIS screwdriver, you better hope you get a NOS vessel because nobody makes them anymore. I like my Wera laser tips...

Re: Cordless impacts and the "lb/ft" wars...when do tools become dangerous in untrain This. In regards to being hazardous, a cordless impact wrench pales in comparison to any type of saw. The first time you feel a chainsaw kickback is a hair raising experience.

These are awesome: http://www.fumotousa.com/ Throw away the as seen on TV gimmicks and free up some room in the toolbox

You aren't wrong in that JIS fasteners still exist, but JIS as a screwdriver standard is extinct. It has been superceded by DIN 5260 which drives both JIS and standard philips fasteners.

If the springs are tensioned properly, it wont be an issue. I would make sure all the hinges and wheels are lubricated and moving freely before deciding to upgrade the opener

Ive had good luck with this one, dries nice and thick.

Reviews from the uk site say the package is labeled Taiwan. Anyway I got this reply from snapon: skookum1 <[email protected]> 6:04 PM (14 hours ago) to [email protected] Hello, I would like to know what the country of origin is for the Bahco S240 socket set. I cannot find it...

Nice find. The ratchet is a 60t At the stateside Amazon it is $114.99 with review saying "it's a steal at this price" Five Stars By Mike on March 7, 2015 Verified Purchase The best. This quality of tools is a steal for the price. https://www.amazon.com/dp/B0001OZHS0/?tag=atomicindus08-20

I bought this earlier today: same deal but adds 2 more batts instead of the grinder. http://www.toolup.com/Makita-XBU02PT1-18V-X2-36V-LXT-Brushless-Blower-Kit-with-4-Batteries $304 with code MAKITA25

The current DIN 5260-PH standard is JIS compatible. This includes wera, wiha, pb swiss, etc. In fact, the bottom of your linked article mentions vessel fits both "phillips" and JIS. Vessel is in fact DIN 5260 as well after more digging...

The heads look incredibly thick. Are they the same thickness as the original SK's?

My timberlands became extremely uncomfortable after 5 years of occasional home use. I went to redwing to try on what they had and came to the conclusion that they are not what I was looking for. The boots I tried were all stiff as a board out of the box and obviously made for someone that wears...

If you are just wanting one for hobby use/random repairs you would be well served by a Hobart Handler 140. They can be had new for under $500 and comes gas ready. It is 115V so you don't have to mess with wiring a new outlet or making an extension cord. I have one and would not hesitate to use...

I know the thread is about 1/4" drives.. but i really like the gearwrench 120xp 3/8" flex stubby. One of my go-to's for random fasteners.. https://www.amazon.com/dp/B00BTEXQ02/?tag=atomicindus08-20