Search results

I know a guy that wont let you touch his torque wrench again if you back it all the way off.

Pry bars, I mean they need to be good metal and have a decent handle but there is not a whole lot of engineering cost there.

Im looking for something similar that can maintain while programming, jump off dead cars in the parking lot and be portable.

GM fuel filters should be attacked with 2 adjustables. Cause there is a good chance you could have 4 different sizes between the 2 filters. Most of these can have an sae wrench work just fine.

I have seen several broken drivers and the bits broken trying to get off brake rotors. I dont own one as a pro. I just use and hammer and a punch with a round end. My method always works. I usually dont put them back but they can be most times.

I like mine and its the only type I have. That said there are some clamps they just wont work on. Also they fell apart twice do the set screw coming out, but I luckily found the end piece and screw and have now lock tighted the screw in. They work great in the fact that you can work the...

If you want a snap on box you need to call the rock and roll truck, you will get a good deal and if they aint got what you want then they can order it.

Timing chain and belt area stuff on fwd they are great, that said I only have 10,12,13 and 14. The 14 is pretty good for ford torque converter bolts. Wish I had a 21,8 and a 5.5 though. Also of note most low profile ratchet and socket sets dont flex head like these will. Have em and not need...

While I agree you are going to catch hell.

I use a pole jack and put pressure on the joint and pop it with the impact until it comes off, but most of mine have to go back on due to it not being what I'm replacing.

I have had a pair of Liquid brand for years. They are aluminum frame with no hinges, you just bend them to fit your face. I hit them, knock them off all the time. They used to say alcoa on the side but it wore off. The lenses are a little scratched but I just deal with it.

I pay so much for the right tool that I get excited about finally using it instead of multi purposing out of necessity. Edit: The other day a guy in the shop borrowed my slide hammer to pull a dowel pin out of a ****** bell housing. Its a matco puller and it has an adapter that screws on with...

I don't like locking, I find that if I have a ratchet in my hand more than likely I need precision. In which I more than likely use both hands. I have the super long 1/2 flex nonlock on a crank pulley bolt and a long 3/8 non lock flex on a torque convertor nut and one hand both no problem. Both...

The main reason that I have snap on, like snap on and only want snap on is because I feel for the majority of their products they are the best. Then Im not getting on any more trucks cause I can only afford so much a week. So I just pay one tool truck guy at a time. MIght as well be snap on...

Had mine for a couple of years now. In fact I was like the second review on Milwaukee's site. Been using it everyday day as a pro since. Yesterday it fell from 7 feet. Cracked the batt just a little but still works just fine. It's really no longer an option or just a really good tool to...

Just put a hex head on the end. So I can use my ratchets plus my sockets or a wrench. I would separate into a bunch of different kits. For instance at a dealership I don't need anything Sae. I also would not want any dies. I would rather have the most common taps. A thread file set and a...

I have one that is only a couple weeks old and only used a couple of times. I can hold it with my hand with a socket on it. Mine was weak at first and I figured I wouldnt use it all that much. But I kept pulling it out and using it and it is getting stronger. Actually starting to like it. Its...

PASS: 3/8 in. Air Ratchet Wrench Item 47214 Pro and I use it pretty often. But... Didnt work out of the box, had to have it, to use right then so tried to get it going. Oiled it up and got it moving, then it got stuck on while plugged in. Threw it in the floor and pretty much fixed it. The...

Only thing I really need is that Milwaukee 3/8 m18 fuel impact. Got the m12 fuel 1/4 hex with the free 3/8 ratchet the other day and like them. But really want to find a super deal on the impact. Dont have any other cordless tools so would need a whole kit.

I have lost so much it makes my cry to add it up. 3 150 dollar stream lights right off the top of my head. One in less than 24 hours of purchase. 15,14,10 8 blue point wrenches. Several snap on sockets. Just a bunch misplaced, left on cars, never seen again.