Search results

no no no the pressure switch wires to the coil on the motor starter....If you wire it this way the coil on the starter will never engage....Please do yourself a favor call an electrician... Dan

wire from the breaker to top of starter, and the bottom goes to the motor....Line is always on top........Hire an electrician !!!!! Dan IBEW 441

Have to agree....

1. Power from the Circuit Breaker to the big screws on top of the starter.... 2. Bottom of starter to larger leads on motor.... 3. Pressure switch to the starter coil....(it looks like the 2 smaller screws on top of the starter..) 4. I am guessing the 2 smaller wires are for a heater....(there...

here ya go....I got 4 of the 8x2' SafeRacks Dan

light fixtures 9 4ft 2 lamp wraps with 4100k blubs with a CRI of 85 over head shelf.... Need to trim out the window and door and do some touch up paint and decide if I want to spend money doing something with the floor but the space is usable and mostly DONE!!!!!! thanks for looking Dan

Its currently 12 degree's outside and its 65 degrees in my garage/shop...Lovin my mini split with heat... inside

ready for primer.... Primer Next up heat and air... Dan

Luckily for me I have a good friend that has been doing drywall since drywall was invented...No joke worked for his dad back in the day you can see from the above pictures all the receptacles.....which are now coming in very handy.. first coat.....

Electrical and air lines...Being an electrician by trade I went way over board...I will never use the 100amps I have and probably don't need 30 plus receptacles..But its cheap when the walls are open... Insulation, I was able to hire this done cheaper than I could buy the material..and I...

All framed up waiting on roof.... My contractor is now all done and the rest is up to me: More to follow... Dan

So it all starts with a silver leaf maple....40 years ago that small tree probably was given much thought...But currently it was about to make our family room into an atrium...The mobile home had served use well for the 11 year we had owned it, but it like the tree now had to go....It just...

What the salesman is telling me is to put a coat of primer on the walls before texture and then aftertetxture prime again..That is 2 coats of primer....I am using Sherwin Williams drywall primer...But 2 coats???? Seems he wants me to buy another 5 gallons of primer..... Dan

So I am getting ready to primer my 24 x 24 garage before I texture it.....The salesman at the store where I bought the primer told me I will want to primer it again after texture before paint.....Is this really necessary or his he trying to sell my 5 more gallons of primer???? thanks Dan

Need recommendations for a compressor for my new shop/garage...Its a 24x24x8....I don't see myself needing more than something to power an impact to take off lug nuts, BUT....A friend told me its like guns safes...Find the size you need and then go up 2 sizes...I did install a Rapid air line kit...

the point your missing is if both legs are on the same phase you no longer have 220v from that breaker....To be clearer if you where to take your existing breaker and move it over you would no longer have any 220v going to the traierl everything would be 110v it takes both legs to get 220v

if you move the breaker over it appears to me that both legs will be connected to the same phase which will not work....You need main breaker panel with feed thru lugs...

Re: gtae07 Suggested Fixture Layout 28' x 24' x 8' I am wondering why you recommend wraps for the 8ft ceiling height...Was gonna go with 6 8ft 4 tube open fixtures in my 24 x 24 with 8 ft ceiling now you got me re thinking it.... thanks in advance Dan

I did look @ is thread a I am wondering now if I shouldn't be thinking 4ft wraps based due to the ceiling height only being 8ft Dan

Checked with North Coast here in town and they where a tad higher for the same fixture HD sells and the ones at Platt where about double the cost.... Dan