Search results

Do you need to put a small gap between each sheet or should I **** them against each other?

I had closed cell installed on the walls and ceiling of my metal building. The expansion of the foam caused some leaking issues with my roof ridge. Even with the closed cell foam, the leak came through the ceiling.

sorry, it looks like my pictures didnt upload on the original post. The building is a metal framed eagle carport building. The longest horizontal span between the studs is 7 ft and the longest vertical span is 4 ft. All the wiring is MC and attached to the metal studs. The building is being used...

I have a 40x40x14 metal building. I had the walls and ceiling spray foamed using closed cell foam and now am looking to cover the walls. I figure my options are drywall or plywood. I'm leaning more towards plywood. What thickness plywood should I use? Do I need to get tongue and groove? If not...

Can you share what he charged per sqft? If it was a lowball bid I think you are kind of stuck with it. But if he was charging a premium rate, I'd absolutely have him rip it out and redo it.

I'd suggest starting with 4. The reflectors and dimmer should be setup this weekend. I will let you know how they work.

I installed 6 150W dimmable HyperLite Heros in my 40x40x14 metal building. I think it was a bit overkill. They light the shop great, but can be blinding if you look up at the ceiling. Messing around now with putting them on a dimmer, removing 2, or getting reflectors

The builder sent a guy out this weekend to look at it. He said the closure strip wasnt installed properly on the ridge cap. He reinstalled the ridge cap, checked that all the screws on the roof were tightened properly, and covered them all with silicone. Big rain forecast for tomorrow, so...

It's possible. Although I'm in Houston and we went through some massive rain storms before I spray foamed and I didn't notice any leaking. Ya I'm not exactly thrilled with spray foam right now. Don't think I'd ever do it again. The original builder is supposed to come out this week to take a...

Before I had it sprayed I waited for a few big rains to make sure there weren't any leaks. I didn't see any leaking so that's why I went ahead with the foam. But maybe it's possible it was going across the trusses and I didn't see it. The fact that the leaks are directly under the ridge make me...

I had my 40x40x14 metal buildings ceiling spray foamed with closed cell a few months ago. Its been very dry here and today was only the third or fourth time it's rained here since I had the work done. I noticed there were 3 leaks coming from the center ridge. 2 of the leaks are close to each...

I just had a 40x40 garage built with vertical siding panels. The slab was 40x40 as well, so the ridges on the siding panels are hanging over the slab what would be the best way to seal these? I was thinking of spray foaming from the inside, then cleaning up the outside with a utility knife...

Thanks! Works like a charm.

I just had a 40x40x14 eagle metal building with a 12x12 chain operated roll up garage door installed. Unfortunately the installers finished very late at night so I didn't catch it at the time, but the garage door doesn't stay closed on its own. When you let go of the chain after rolling it down...