Search results

There are three ways to get rid of water - evaporation, gravity and a pump. You should have corrected grade before applying epoxy. Now it is too late to solve the issue with gravity. You could direct some air towards the low spot to help it evaporate quicker, or you could use some kind of small...

Correct me if I am wrong, but this would only work if MVER is less than 3lb / 1000sq ft / 24hrs. Otherwise some kind of primer is required. Here is a test with same or next day delivery https://www.amazon.com/dp/B0078KMKCG/?tag=atomicindus08-20

I would recommend using spiked shoes to inspect your work for holidays after you finish rolling if you are going with solid color. With no flakes the holidays are very visible and with one color coat you get only one chance to get rid of them.

You'll be fine with polyurea in low temperatures. If anything, it will not skin in your paint tray. But you have to be careful with any epoxy, including primers. Legacy sells cold weather primer. I used summer primer (ordered my kit in July, decluttering took longer than expected) in winter and...

If you are planning on grinding dry, damp (not wet) concrete would not hurt. I think you could grind the same day you power wash.

If you want 1-part polyurea next week, you need to order now. It ships ground due to being hazardous cargo and will take up to a week to get to you, excluding any lead time. For the temperatures, I would check the slab temperature and not the air temperature. Once you lay the coating down, it...

When I was about 16yo, I got a broken electric shocker that I was attempting to repair. I've replaced one of the caps, and it was still not working. Touched the cap or some other exposed wire and fell off the chair, pulling the shocker and hot soldering iron on top of me. Luckily I did not get...

Bigger pulley makes motor run slower, increasing charge time for run capacitor on PSC motor. Capacitors charge over time and discharge almost immediately.

What kind of devices are you connecting to ethernet and where do they get power? Could you power media convertor or switch from the same source?

The only thing you could easily replace on these is valve stem gasket. If you are trying to lube the ball, you could do that through in/out openings, no need to disassemble the valve.

Check out Netgear GS105PE. It is PoE-powered 5-port switch with PoE pass-through. It could take 802.2at and pass-through 802.2af with proper power negotiation and everything. I am using two of these.

You could buy battery adapters for most brands. All 18 and 20v batteries are actually 18v nominal. I use DeWalt 20V MAX batteries with DeWalt and Ryobi tools. There are adapters out there for Makita and others. Settle on a single battery platform and buy adapters for multiple tool brands. As for...

Fiber is not expensive these days. https://www.amazon.com/dp/B07YWK8C4X/?tag=atomicindus08-20 Fiber is nonconductive, unless it is for direct burial with tracer wire, that must be grounded.

Many houses used to be wired with shared neutral to save on copper. Most AFCI breakers don't like such wiring. The only exceptions that comes to mind are GE-manufactured AFCI breakers.

Warm humid air, cooler ground and conduit. Water will eventually condensate. With no other place to go and not enough air movement for evaporation it will get wet.

Simple answer is ethernet devices are already galvanically isolated. That is the reason there are not a lot of surge protectors for ethernet. Ethernet wire is literally sitting between two transformers rated for at least 1500v. Many devices are rated for 2500v. Here is a datasheet for...

Here are the specs of WAGO I am using for bigger loads around the house. I am crimping ferrules when using it with stranded wire. https://www.wago.com/us/wire-splicing-connectors/push-wire-connector-for-junction-boxes/p/773-173

You are more likely to break conduit than breaking fiber when pulling fiber in kevlar jacket, but it space is limited I see how this can become in issue. I have pulled fiber in 50" 3/4 conduit with mule tape, two runs of CAT3 and one RG6 already in it and as long as your fishing tape can get...

I will post updates once I receive my additional material and finish applying the coats, but here are some lessons learned so far: - Order your kit right before you are about to apply your polyurea system. This way you'll get fresh polyurea product and correct primer for the weather. -...

The next step should have been an easy one. Roll two more coats of Nohr-S. I decided to start with my old stock of the remaining two gallons of Nohr-S from my July order with the two quarts of tint I've just received. I cut all the corners and started rolling with the 18-inch roller. By the...