Search results

Installed the 600W Inverter in the power station, along with the 3 prong 15 A outlet. 12 V outlet options include an Anderson plug (which the battery charger can plug into as well) Cigarette lighter port, USB A ports, and 7 prong Trailer connection. added a cooling fan for the Inverter as...

There is one hole in this thread......

This weekend I used the power station to run my horse trailer lights as well as charge phones, and plug in my travel CPAP. Hardly drew it down enough to charge. But hooked up to one of the Panels anyway just to watch the screen blink...

https://www.facebook.com/reel/1350720626280231

Looks like what i would have done in your situation. This is what I have in each of the trailers on the ranch: https://www.amazon.com/Trailer-Helper-Steel-Jack-Dimensions/dp/B000O5XC56/?tag=atomicindus08-20

Took the next step in my DIY Power Station project. Added the solar charge controller and a connector for the solar panels, as well as a positive wire cutoff switch. The heart of the system is a LiTime 100Ah LIFePo4 battery (group 31) the box is a rolling Bauer toolbox. The Build was inspired...

On an 80 acre farm about 200 yards from a 2 lane road. Sound engineer was here yesterday tweaking setup. Main focus will be voiceover and audiobook recording

I'm building a portable Power Station with a 100 Ah battery. Originally I planned to run my ResMed Air mini on an inverter but found the dc adapter cord mentoined up thread. I wired in a 7 pin receptacle with just hot and ground wires and I will plug my horse trailer into it to power all the...

Just bought a cheap Yeswelder auto darkening but have not used it yet. Certainly a step up from the one I found on the highway and have been using since 25 years ago. Isn't there a formula like buying an engagement ring on what % of your monthly salary from welding you should spend on a helmet?

I bought a Graco to paint my house interior in 2016, and exterior in 2018. Never done it before. If it was uneven, then I rolled it to even it out. If you hate it, someone will buy it used from you, and you are still spending less than renting a machine other folks didn't take care of. I...

That's the machine I have available in the shop. Building Corral Fences and Sign posts.

Welded the 3/4 inch tubing leg back together on a Horse Hayrack. Found an old bolt to put inside it and slathered some molten metal around enough to make it hold. Used a scrap piece of angle iron to go over the fracture to lend enough strength. Will be a race to see if it rusts out or breaks...

Looking to do some projects with oilfield pipe and sucker rod. Thinking about E7018AC rod on the welder below. I've watched Austin Ross Welding on YT and taken 2 years of welding in High School in the 20th Century. Well versed in welding dirty crappy material with a 6011 to get the job...

Sounds like code requires Drywall for at least a portion( adjoining house wall and ceiling). If that is the case and you are going to replace that, then what's a few more sq. feet? I would however put a wainscoting around to protect it from scuffs and scrapes. It can be as rustic, or fancy as...

I 've always felt that that is what we have thermostats for. I had a boss who would insist on turning off our retail showroom heater in the evening and weekends. He would then turn it on in the morning to bring it back up to reasonable temperature. Never made sense to me.

I grew up "making do" and we had plenty of "temporary fixes" that lasted years. This is the song i'm going to play at my father's funeral.

I'm thinking about what it would take to upgrade the bridge coming in my driveway. This Bridge served us well all these years with 80,000 pound semi's driving over it daily. Feed deliveries, and a daily milk tanker 7 days a week x 30 years. The Footings are concrete, and probably 80-100...

So I'm gathering that I'd need a 9x7 garage door which would give me 12" of Headroom. Enough for a standard radius track. Wallmounted opener like Liftmaster or Genie. Curious how folks would frame the opening to allow enough side room. (9'6" to inside of the 4x6 and concrete side wall. )

I watch a You Tuber https://www.youtube.com/@WaldosWorld do work in a shed where you can see daylight between the siding boards and on a gravel pad. It really made me reconsider what I "needed" as far as a garage to work in. Especially here on the West Coast with few, if any, snow days or...

U-Cart towable mixer rental. 1 Yard or 1.75 yard capacity. https://www.classicreadymix.com/how-to-use-our-barrel-u-cart-concrete-mixing-trailer/