Search results

go to Habitat and check out their sockets- the one in town here has three large buckets of sockets, many of them Craftsman, Proto, Blackhawk, etc, in great shape. I bought a 17mm the other day for 50 cents. Inventory changes daily, so don't give up too soon...

your last paragraph makes it sound like you already know the answer...except maybe the quilting thing!

I also wanted to live in a cabin in the woods, on acreage, etc. I have been retired for about 10yrs now and live in a mountain town...in a RENTAL on a golf course! With everything mentioned in these posts, plus the way the weather is changing these days, I think it is most important to be able...

Not in Spirit Lake! Hahahaha.

That 5% is going to cost you probably 80% of a one hundred dollar bill- probably more than the cost of the entire vise. How about a picture of your vise?

How big is your wallet? You only have to remove 1 board, probably held down by 4 screws. Heat the screws with a torch, then lift the board out- the threads aren't that deep.

From the info you have given us, it could be a bit older than your father...

The red vise I posted is a Wilton, with a U-shaped slide. That is what I was comparing to the old red Craftsmans. I now see what you are saying-the OPs vise has a square slide, I think some people call them "pseudo Bullets!"

It looks like a Wilton. Even if it is, it is only a light duty homeowners grade vise, similar to the old red Craftsmans from the 70s-80s. I've had both- I prefer the old Craftsman.

ya, start somewhere else. It appears to be a made in China drill press vise- maybe worth $5, IF you need that style vise.

This is the kind of fix I would expect from a Texan! As a fellow Texan, I really appreciate the "direct approach" to fixing things like this. I figured if a ghetto fix did not work for this vise, it was going to the scrap pile anyway. Thanks.

Found an old Wilton vise with a "misaligned" moving jaw. The slide is straight, but the head is at angle that doesn't allow the main screw to fit thru the opening. Is there any ghetto fix for this, or is it headed for the junk pile? I know it is only a lightweight vise, but the prior owner sure...

I have read that a torque wrench is most accurate in the middle of its range, so pick the one that fits your needs. It all depends on what you are working on, and whether that much precision is really needed. I work on mountain bikes that have some low torque settings, but snug, hand tight, hand...

I have looked at a few used boxes with full width drawers and 37"-40" width (Craftsman, Biuepoint, and Mac). It always seemed that the drawers tended to sag enough to rub on the drawers below them. Once that happens I don't think there is an easy way to fix them. I went back to a 2 bay style...

do what the rest of us Craftsman guys did- get the HF 24" breaker bar. It works great, and almost looks like a CM bar anyways...And HF is still in business.

Knaack makes several versions of that style box...not for $70! They start at over $1000. https://www.google.com/search?q=knaack+rolling+workbench&rlz=1C1AOHY_enUS708US708&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjbqoWrvcHfAhUBKHwKHTqVCtkQ_AUIDygC&biw=1024&bih=724

not familiar with that brand, but its competition would be the, you guessed it, the Harbor Freight 41" top and bottom new, for about that same price, or maybe just the new 44" x 22" deep bottom only, which would probably hold the same as that top and bottom. Around here, you can buy the 18"...

are you sure that vise is meant to be mounted without a swivel base- ask the guy to post a picture of the other side to make sure it is even drilled for a second mounting hole. In any case, its not worth anywhere near $100. Keep looking...

I built a couple of drawers out of wood, to put in the space. They worked great. The cabinet didn't come with a door. I finally found an old Cman bottom box with 5 drawers, so I sold the 3 drawer and 8 drawer boxes. Not bad...for $35.

well, 3 people on earth think that thing is worth over $600.:lol_hitti