Show your new tool arrivals

Strouty · Feb 29, 2016

Take a look at these, the same manufacturer, but a little less corny.

http://www.amazon.com/dp/B002L6HJAA/?tag=atomicindus08-20

90zcar · Mar 1, 2016

Strouty said:
So I just got my metric 12 point Snap On set in and it does not have 11 mm in the mid length, they don't even make one???? They just left a blank space screaming at my OCD!

Damn they are getting like harbor freight now skipping sizes

Sent from my iPhone using Tapatalk

mjoekingz28 · Mar 1, 2016

How bad is the economy?

Snap-On is skipping socket sizes!

T45 · Mar 1, 2016

argh, they skipped 19 as well :scared:

BMack37 · Mar 1, 2016

Strouty said:
Take a look at these, the same manufacturer, but a little less corny.

http://www.amazon.com/dp/B002L6HJAA/?tag=atomicindus08-20

One of the best tools I have bought; when you need it, it's worth it's weight in gold. If it's not a flush or recessed screw, this is what I reach for every time...it takes about as much time as using a screwdriver on a non-stripped head. Also, if you have a flush screw head and you have to drill it out, these will remove the left over stud with ease(if it sticks out at all). Better than left handed drill bits, better than EZ-outs and all those other tools for the stripped head task.

OCD · Mar 1, 2016

A few more things I had on order came in,

1/4" torque wrench to complete the set,

more non marring trim tools,

Sae hex sockets, they were 50% off retail,

Hutch hangers,

Picked this up for my Dad's garage,

Today I stopped to see Snap On Clint at his storage shop while he was cleaning it up and getting ready to do inventory... He hooked me up with some cool promo stuff!!

TK-421 · Mar 1, 2016

Strouty said:
Take a look at these, the same manufacturer, but a little less corny.

http://www.amazon.com/dp/B002L6HJAA/?tag=atomicindus08-20

How useful are they for automotive work? Been looking at those, but don't know if they're useful for basic automotive repair.

anndel · Mar 1, 2016

one9gt said:
Sent from my iPhone using Tapatalk

Got it to remove the rusted/rounded brace bolts to access burnt headlight bulb. I was able to remove 2 bolts easily and replace them with new bolts. I rounded one using Vise Grips. The other was already rounded. I was skeptical at first but it works like it said it would. :rocker:

The Toolest Guy · Mar 1, 2016

Strouty said:
Take a look at these, the same manufacturer, but a little less corny.

http://www.amazon.com/dp/B002L6HJAA/?tag=atomicindus08-20

anndel said:
Got it to remove the rusted/rounded brace bolts to access burnt headlight bulb. I was able to remove 2 bolts easily and replace them with new bolts. I rounded one using Vise Grips. The other was already rounded. I was skeptical at first but it works like it said it would.

I just picked up both the Engineer PZ-58 and the PZ-59 (larger version) myself. Have used the PZ-58 already and they work great. Definitely not a gimmick.

sld961 · Mar 1, 2016

Got my order from Trusty Cook yesterday.

Strouty · Mar 1, 2016

TK-421 said:
How useful are they for automotive work? Been looking at those, but don't know if they're useful for basic automotive repair.

If you have any small bolt or screw that is rounded off, they will grab it. The only thing they can't do is countersunk or flush screws, but you don't need much of a head to grab. Basically the first time you use them, they pay for themselves.

90zcar · Mar 1, 2016

OCD said:
A few more things I had on order came in,

1/4" torque wrench to complete the set,

more non marring trim tools,

Sae hex sockets, they were 50% off retail,

Hutch hangers,

Picked this up for my Dad's garage,

Today I stopped to see Snap On Clint at his storage shop while he was cleaning it up and getting ready to do inventory... He hooked me up with some cool promo stuff!!

What is the plastic pry bar that's sitting on top of the pouch

Sent from my iPhone using Tapatalk

mjoekingz28 · Mar 1, 2016

Looks like a Canadian glass ice scraper.

Notorious BRT · Mar 1, 2016

NOS from HJE :rocker:

90zcar · Mar 1, 2016

No ....the one on this pic

Sent from my iPhone using Tapatalk

Monte · Mar 1, 2016

Bosch 12 volt brushless angle grinder for 3" discs

neonlazer · Mar 1, 2016

Thanks to Richard and Victoria for yet another awesome TC hammer. Cable cutters and my OH $%@$ larger and heavier than I thought Cobras thanks to the knipex sale thread in hot deals.

Sent from my SM-G900V using Tapatalk

lucky3 · Mar 1, 2016

Just picked this up. Man it feels better then the snap on 80thooth.

FOCUS.FREAK · Mar 1, 2016

lucky3 said:
Just picked this up. Man it feels better then the snap on 80thooth.

How much did this run you?

Sent from my iPhone using Tapatalk

lucky3 · Mar 1, 2016

I think it was $120

vartz04 · Mar 1, 2016

Monte said:
Bosch 12 volt brushless angle grinder for 3" discs

They need to bring this to the USA

ADSR · Mar 1, 2016

I'm no grinder guru, but I saw this on C/L this morning for 55 bucks, I had to run and buy it. Original owner and still the original stone wheels on it.

Strouty · Mar 1, 2016

You freaking ****!

wagzilla · Mar 1, 2016

Sold my old a/c machine Sunday and got my new a/c machine on Monday night. Robinair 34788ni-h

and air less tires for the back

So far I'm really digging this machine.

James

Xmoonstompx · Mar 1, 2016

Sent from my LG-H901 using Tapatalk

OCD · Mar 1, 2016

mjoekingz28 said:
Looks like a Canadian glass ice scraper.

That's it!!

:beer:

OCD · Mar 1, 2016

90zcar said:
No ....the one on this pic

Sent from my iPhone using Tapatalk

That is a cutter/scraper that came free in the kit...

FOCUS.FREAK · Mar 1, 2016

Xmoonstompx said:
Sent from my LG-H901 using Tapatalk

You will love those

Sent from my iPhone using Tapatalk

FOCUS.FREAK · Mar 1, 2016

My sockets and extractor kit came today from tools delivered

Sent from my iPhone using Tapatalk

ciscoford23 · Mar 1, 2016

Xmoonstompx said:
Sent from my LG-H901 using Tapatalk

Are these the combo deal from NTX Tools that came with ratcheting wrenches?

mrfrost05 · Mar 1, 2016

These just came in. Got these off the eBay permathread thanks to four cycle!

Sent from my iPad using Tapatalk

ADSR · Mar 1, 2016

Strouty said:
You freaking ****!

55 was his asking price. When I offered him 50, I could almost see steam coming from his ears. :lol:

firworks · Mar 1, 2016

sld961 said:
Got my order from Trusty Cook yesterday.

Nice set! I'm just tearing into my bounty right now. The stubbys are so cool! Pics to follow...

Fedwrench · Mar 1, 2016

lucky3 said:
Just picked this up. Man it feels better then the snap on 80thooth.

I have one of those and I have to agree with you :wtf:

I wish they would hurry up and release the 1/4 inch drive versions.

Tacoma bo · Mar 1, 2016

neonlazer said:
Thanks to Richard and Victoria for yet another awesome TC hammer. Cable cutters and my OH $%@$ larger and heavier than I thought Cobras thanks to the knipex sale thread in hot deals.

Sent from my SM-G900V using Tapatalk

Do I spy a Tacoma tailgate and bed liner? Nice haul

MattVette89 · Mar 1, 2016

Fedwrench said:
I have one of those and I have to agree with you

I wish they would hurry up and release the 1/4 inch drive versions.

+2

I did a "test" one day and used both side by side and I prefer the Mac. My driver said he has the 1/4" on the way soon.

cweidert03 · Mar 1, 2016

Got these in today. Gear wrench mid length SAE 1/4 and 3/8....

Gearwrench torx set
Sunex 1/2 deep SAE impact
Sun ex 1/2 metric shallow
VIM hex 26 piece kit. SAE & Metric

Waiting on gearwrench SAE non ratcheting combination wrenches and Facom 14pc metric

Sent from my iPhone using Tapatalk

neonlazer · Mar 1, 2016

Tacoma bo said:
Do I spy a Tacoma tailgate and bed liner? Nice haul

Maaaaaybeeeeee. If your talking about the drop in rubber liner yes. :thumbup:

SHolt · Mar 1, 2016

cweidert03 said:
Got these in today. Gear wrench mid length SAE 1/4 and 3/8....

Gearwrench torx set
Sunex 1/2 deep SAE impact
Sun ex 1/2 metric shallow
VIM hex 26 piece kit. SAE & Metric

Waiting on gearwrench SAE non ratcheting combination wrenches and Facom 14pc metric

Sent from my iPhone using Tapatalk

Nice haul man!! Whish I could afford that. Are we ou becoming a tech?

Rossco · Mar 1, 2016

New Maxium Vise.

Nice pipe grips.

Funny thing, it looks EXACTLY the same as my friends Wilton. Taken plenty of abuse.

Show your new tool arrivals

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Banned

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

ALLIANCE MEMBER

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member