Show your new tool arrivals

48548 · Feb 8, 2018

shanny19 said:
I've spent the last 20 minutes reading nothing but bad reviews of that thing, and I still WANT one!

What is that and what does it do?

Sent from my SM-G955U using Tapatalk

48548 · Feb 8, 2018

48548 said:
What is that and what does it do?

Sent from my SM-G955U using Tapatalk

Cal-van 483 90 degree gearless drive.....

Sent from my SM-G955U using Tapatalk

nanofrog · Feb 8, 2018

PR1Gneon said:
Maybe someday ill need it.

Sent from my SAMSUNG-SM-N920A using Tapatalk

What is it?

66HertzClone · Feb 8, 2018

Read the post above yours.

upgrading · Feb 8, 2018

Pliers from Amazon.
Plier wrench x2 from the Sears $50 back in points deal.
View media item 80519
View media item 80520
View media item 80521
View media item 80522

48548 · Feb 8, 2018

Just got the silver made in spain channel lock.. nice and tight.. next to my proto 4 inch...

Sent from my SM-G955U using Tapatalk

scubadoober · Feb 8, 2018

For hand tools you can't get much more of a difference in size. I got the KAL USA universal off EBAY for 3.20 shipped, and the channellock 460 on clearance at Meijer for 17.99. I had been procrastinating on a 460 for years. Meijer had a fair amount of tekton, channellock, and a few others on clearance. The other two 460's had a significant overbite so I settled on this one fitment wise.

shanny19 · Feb 8, 2018

scubadoober said:
The other two 460's had a significant overbite so I settled on this one fitment wise.

I don't think it's a safe bet to order Channellock over the interwebs these days. The last two needlenose pairs I bought, I had to inspect 6 or 7 of them before I found a pair that had good grind lines and match-up. Really glad i was in a store and not ordering in the blind.

Indy125 · Feb 8, 2018

nanofrog said:
What is it?

I need one just to play with at work!

PR1Gneon · Feb 9, 2018

Indy125 said:
I need one just to play with at work!

I have been spinning it for 2 days just for stress relieve.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Tonyuk · Feb 9, 2018

Rubiman14 said:
Snap-on guy showed up with some things I ordered

Those long gearwrench sets are excellent.

nanofrog · Feb 9, 2018

66HertzClone said:
Read the post above yours.

Thanks.

ocloc24 · Feb 9, 2018

Rubiman14 said:
Snap-on guy showed up with some things I ordered [emoji16]

And of course the obligatory drawer pic with some new tools

Are those 120xp?

JuliusPepperwood · Feb 9, 2018

Picked up this MAC cooling system pressurizer w/ adapters for heavy duty trucks on eBay for $70

View media item 80601

rmsg0040 · Feb 9, 2018

Craftsman screwdrivers are Made in Japan, same as Vessel impacta. Went to HF looking for the elusive Braun LED but none in stock. Picked up a HyperTough led light at Walmart USA, was worried that it was cool white, but it is neutral/warm white. Cost was just under $20, it is really well built, I was actually surprised. Next time I am in the US, I will buy another.

Cheap picks and magnetic socket holder (same as mechanics time savers) from princessauto, check surplus. $10 gray tools wrench

<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396874859/in/dateposted-public/" title="IMG_20180209_160403666"><img src="https://farm5.staticflickr.com/4631/28396874859_91c0a68ef4_b.jpg" width="488" height="651" alt="IMG_20180209_160403666"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396874239/in/dateposted-public/" title="IMG_20180209_160937227"><img src="https://farm5.staticflickr.com/4752/28396874239_e0fce498a3_b.jpg" width="868" height="651" alt="IMG_20180209_160937227"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396873789/in/dateposted-public/" title="IMG_20180209_160945049"><img src="https://farm5.staticflickr.com/4748/28396873789_7c6837ebaf_b.jpg" width="868" height="651" alt="IMG_20180209_160945049"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396873249/in/dateposted-public/" title="IMG_20180209_162713689"><img src="https://farm5.staticflickr.com/4624/28396873249_1627edc952_b.jpg" width="488" height="651" alt="IMG_20180209_162713689"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396872999/in/dateposted-public/" title="IMG_20180209_185319797"><img src="https://farm5.staticflickr.com/4677/28396872999_35a259a304_b.jpg" width="488" height="651" alt="IMG_20180209_185319797"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/28396872859/in/dateposted-public/" title="IMG_20180209_185347504"><img src="https://farm5.staticflickr.com/4741/28396872859_ae06a3bceb_b.jpg" width="488" height="651" alt="IMG_20180209_185347504"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/39278941115/in/dateposted-public/" title="IMG_20180126_170516864"><img src="https://farm5.staticflickr.com/4652/39278941115_d074b77d6d_b.jpg" width="868" height="651" alt="IMG_20180126_170516864"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>
<a data-flickr-embed="true" href="https://www.flickr.com/photos/151400936@N07/39278940815/in/dateposted-public/" title="IMG_20180126_171013196"><img src="https://farm5.staticflickr.com/4746/39278940815_d95a80c4d1_b.jpg" width="488" height="651" alt="IMG_20180126_171013196"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>

sdavis622 · Feb 9, 2018

Used table saw off FB swap n shop.

New miter saw from factoryauthorizedoutlet.com

Wamsutta · Feb 9, 2018

I see that water softener in the background. I don't have one anymore but the house is still plumbed for it. I miss that slippery water.

80mirada · Feb 10, 2018

Picked up a 1/2" Porter Cable air drill for $36 at the local Ace. Nice Ebay score of a 29pc set of M7, Made in USA, Wurth branded drill bits for $40.

JRC3 · Feb 10, 2018

Wamsutta said:
I see that water softener in the background. I don't have one anymore but the house is still plumbed for it. I miss that slippery water.

Then install one. It's a tool after-all.

Best water softeners for the price. Fleck valves and Clack tanks for the price of HD and Lowes junk. http://www.qualitywaterforless.com/Meter_Water_Softeners_s/2.htm

sdavis622 · Feb 10, 2018

Wamsutta said:
I see that water softener in the background. I don't have one anymore but the house is still plumbed for it. I miss that slippery water.

Haha. Always feels like you can’t get all the soap rinsed off!

Sent from my iPad using Tapatalk

natejohn · Feb 10, 2018

A couple of new to me arrivals! Picked up the impact for cheap, couldn't say no. The wrenches I've added to my 4 way angle vintage collection.

That being said, if anyone has any of this style angle wrench from Snap On, there's a few more sizes I'm on the hunt for!

jeffmoss26 · Feb 10, 2018

stopped by Samsel Supply here in Cleveland. I've raved about them before - they sell industrial supplies and tools, specializing in marine items. They have a sizable clearance section and I found a few goodies today.
Had to get the little jab saw, never saw one like that before. The holesaw is an odd size (15/16) that I've been looking for. Also got a nice pair of winter gloves (not pictured).

2004EP3HATCH · Feb 10, 2018

I got 3 Armstrong’s so far:

PHP:

[PHP]

[/PHP]

krc328ic · Feb 11, 2018

MAC mr990pa 90 tooth, 9 inch... OMG Amazing! :pimpflash

kiatech · Feb 11, 2018

Fleabay pickup

Sent from my LON-L29 using Tapatalk

canuckian · Feb 11, 2018

ocloc24 · Feb 11, 2018

kiatech said:
Fleabay pickup

Sent from my LON-L29 using Tapatalk

Best hex bit sockets imo

ocloc24 · Feb 11, 2018

canuckian said:

That's one **** right angle drill

PR1Gneon · Feb 11, 2018

krc328ic said:
MAC mr990pa 90 tooth, 9 inch... OMG Amazing!

[emoji106]

Sent from my SAMSUNG-SM-N920A using Tapatalk

trytochaseme · Feb 11, 2018

Currently on a hammer kick. Picked up snap on 24oz dead blow. Picking up a 48oz tomorrow from the truck.

Also got a OSCA 300g machinist hammer.
Will be ordering a lot more hammers from them. Absolutely love this little thing.

PR1Gneon · Feb 12, 2018

Universal joint metric socket set.

Sent from my SAMSUNG-SM-N920A using Tapatalk

kb1982 · Feb 12, 2018

Not new, but it's new to me. Duro 3/8 flexhead ratchet, wright 19mm socket and extension.

s-l1600 by https://www.flickr.com/photos/110082568@N08/

Sliding T-Handle · Feb 12, 2018

Tired of messing around with China made screw extractors. I ordered some from Zoro that were advertised as usa-made and when I received three sets of them they said China. So then I just gave those away and I went on a mission for usa-made on eBay and scored these.

Greenfield on the Left, Hanson on the right. So on Zoro even with a 25% coupon I paid a little over $40 for 3 5-piece sets that were supposed to be made in the USA. Let me just say that eBay is the place to go for screw extractors. Cheap; cheaper than Zoro(even with coupon) and made in USA when Zoro is not(they tell you it is; but they send you China). Too many people in the industry who do not pay attention to detail. I was specifically looking for American made extractors.

There is a good extractor made in China that I've had good luck with. Mibro; they are carried at Tractor Supply. Broken bolts are an everyday repair in my job. I have best luck with spiral easy outs. They won't twist. I've had the body on Square easy outs twist.

Sent from my XT1635-01 using Tapatalk

PelicanPines · Feb 12, 2018

That style are my first choice in easy outs as well. Mine are USA

sdavis622 · Feb 12, 2018

New pocket hole jig today.

Sent from my iPhone using Tapatalk

rmsg0040 · Feb 12, 2018

I was looking at that kit online today, comparing to kreg and wolfcraft

02Xterra · Feb 12, 2018

First order from Mobile Distributor Supply.. sign up for emails and get 10% off.

Sent from my SM-T700 using Tapatalk

48548 · Feb 13, 2018

New order from Frank's... my first nepros ratchet..

Sent from my SM-G955U using Tapatalk

ephotrod · Feb 13, 2018

Sent from my SM-G955U using Tapatalk[/QUOTE]

What are these pliers for?

Travisnd · Feb 13, 2018

02Xterra said:
First order from Mobile Distributor Supply.. sign up for emails and get 10% off.

Sent from my SM-T700 using Tapatalk

Nice tray cart!

Show your new tool arrivals

Well-known member

Well-known member

Well-known member

Attachments

ALLIANCE MEMBER

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Active member

Attachments

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Attachments

ALLIANCE MEMBER

Well-known member

Attachments

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Attachments