cajunfirehawk
Well-known member
Ok, please post all of the 2018 TSC stuff in this thread, a lil late but better than never.
2018 Tractor Supply Clearance thread...
- Thread starter cajunfirehawk
- Start date
KSeriesChevy
Well-known member
100 ft Job Smart Extreme Flex air hose. Shows 19.99 online and in store. Bought 4 of them 9.99 each at 2 diffrent locations. Cashier said mush be a company wide clearance item. Pretty decent hose so far. Way better than my Pvc one.
Sent from my LG-H910 using Tapatalk
Sent from my LG-H910 using Tapatalk
Attachments
EOC_Jason
Well-known member
about time we had a 2018 thread!If you are searching for the 1-1/2 ton aluminum jacks at your store, they are usually in an odd place. Most of my local stores had them by the tool boxes, pretty hidden from view. There is usually some diesel exhaust fluid near them, also a clearance item. If you can find one store near you that has them marked down to $21.99, the rest of the stores will probably price match. I was lucky to grab a few in my area for that price, they make for great gifts, and great trade bait! If you put 3 in your cart and then search "check other stores," it will show you how many are available at each store. One of my local stores had 3 listed, but after a couple of visits, and being told they were probably stolen, I finally found them last night.
https://www.tractorsupply.com/tsc/product/cargosmart-aluminum-90-in-fixed-s-curve-ramp?cm_vc=-10005
Found these ramps at $69 and my TSC does half off clearance .
Found these ramps at $69 and my TSC does half off clearance .
Last edited:
https://www.tractorsupply.com/tsc/product/dee-zee-toolbox-hitch-mount-bracket?cm_vc=-10005
Toolbox hitch-mount bracket
$9.99
Toolbox hitch-mount bracket
$9.99
Last edited:
https://www.tractorsupply.com/tsc/p...HRKkPhQFF6sdxID1qWEYiOm5jkel-3zBoC7GkQAvD_BwE
Quick-release vise
$7.99
Quick-release vise
$7.99
ARKeller
Active member
Mine store is showing 79.99, how are you seeing it for 7.99. Sorry if this is a stupid/obvious question.
Sent from my iPhone using Tapatalk
pelletman
Well-known member
I don't even seen a 1.5 ton on their site. Link?
ineedtools
Well-known member
Absolutely!
EOC_Jason
Well-known member
The TSC website does not show clearance prices, you have to go in store (or call) to find out actual price. Often the sticker price in the store isn't even correct for clearance stuff....
https://www.tractorsupply.com/tsc/product/big-red-15-ton-aluminum-steel-service-jack?rfk=1
When I ask an employee to scan something to check the price, they are often surprised how low it is. If you really want something, I wouldn't suggest calling, because it's possible the employee may just scoop it up for themselves!
I'm curious if anyone else finds that vise. When the employee scanned it, I even asked him to repeat what he said because I thought I misunderstood him!
Is the vise in stock at your store?
Bendibal
Well-known member
I bought a couple at the Bloomington, IN (really Ellettsville)store for around $7.50 each. I left four in the store. They had them in a red cardboard display in the middle of the store, along with other clearance/special items.
BLOOMINGTON
5790 WEST STATE RD 46
BLOOMINGTON, IN47404
812-876-1108
#1415
Ramps down to $35 now.
Did you ask an employee to scan the items and check the price? They are usually lower than what they are marked.
Ofcourse nothing at the TS I go to in Allentown. And I actually took them to the register to purchase thinking that the tags were old but they rang up the same as the tag was showing, with the exception of the air hose (showed $14.99)
EOC_Jason
Well-known member
Call / go-to store...
ineedtools
Well-known member
@BORED350 WOW, over 1000 ZIP TIES!!! Headed out to my local TS today to see if I can score some of these deals, hoping to grab an air hose, that aluminum jack, and some of those zip ties!
@EOC JASON
NEVER CALL!! NEVER EVER NEVER EVER!!!
Once you call you tip off the employee who'll most likely see that it is a deal and set it aside for themselves or call a buddy to tip them off.
I once made this mistake at staples years ago with a digital video recorder, called to confirm it was in stock and when I got there it had mysteriously disappeared, most likely because they saw it marked down from $399 to $49.
@EOC JASON
NEVER CALL!! NEVER EVER NEVER EVER!!!
Once you call you tip off the employee who'll most likely see that it is a deal and set it aside for themselves or call a buddy to tip them off.
I once made this mistake at staples years ago with a digital video recorder, called to confirm it was in stock and when I got there it had mysteriously disappeared, most likely because they saw it marked down from $399 to $49.
EOC_Jason
Well-known member
I don't personally call, I was just saying that is something you can do.
My store has mostly women and one really old guy. I don't think they are too concerned with a floor jack...
My store has mostly women and one really old guy. I don't think they are too concerned with a floor jack...
Retlaw 66
Well-known member
Trexlertown shows the 1.5 ton jack is in stock.
I bought one in Bedminster a few months ago when they had the 20% off a clearance item coupon, about $40 w/ coupon.
I once found a drill bit set that was marked 'was $4.99, now $14.99' (not a typo!)..... took it to the checkout and it was in fact $14.99.
ineedtools
Well-known member
You're lucky, both stores near me are staffed with younger guys. One guy sees me come in always says "there better be 2 of whatever you're buying" or " leave me one"
It was 27.99 at my store
Motown
Well-known member
Picked up a jack today. It scanned $44.99. I asked the cashier if they price match. I told her other stores are clearencing them for $21.99 and it was the last one in the store. She asked what stores had them for that price. I told her I saw it on the net. She ended up giving it to me for $21.99.
Thanks for the posts everybody. I went to TSC for the first time today. Got the ramps for $33. The computer said they had 6 hoses and 1 jack, but couldn't find them. Asked an employee who seemed like he was well familiar with the stock system and he couldn't find them either. Dang!
That jack is probably there somewhere! Look in all 4 corners, especially near the bathrooms. Most of the jacks I found were near the truck toolboxes. One had them in the middle of the store with some random clearance stuff. For $21.99, it's worth looking for it, and some stores had 3 in stock. If it was easy to find, it would already have been sold, and long before it was lowered to it's current price
Motown
Well-known member
That jack is probably there somewhere! Look in all 4 corners, especially near the bathrooms. Most of the jacks I found were near the truck toolboxes. One had them in the middle of the store with some random clearance stuff. For $21.99, it's worth looking for it, and some stores had 3 in stock. If it was easy to find, it would already have been sold, and long before it was lowered to it's current price
I bought 2 more at another location. They where up on the top shelf, above the other jacks. The first one I found at the end of an asile, on the ground.
OP
cajunfirehawk
Well-known member
Yall have the sku#?
Motown
Well-known member
r.czankner
Active member
- Joined
- Dec 12, 2015
- Messages
- 41
For the Eastern Pennsylvania guys,
I just got one yesterday at the Lehighton, PA store. There was still 2 left there as well.
No air hoses or zip ties.
I just got one yesterday at the Lehighton, PA store. There was still 2 left there as well.
No air hoses or zip ties.
r.czankner
Active member
- Joined
- Dec 12, 2015
- Messages
- 41
Got a vise for $23.99 at the Quakertown, PA store. There’s still one more left.
sku?
Just got back home from TSC. I ended up with $150 worth of reg priced stuff for $40. But in the Export, PA location the air lines are on sale. I got a Jobsmart 75’ 3/8 rubber line for $6.99 and a Jobsmart 50’ 3/8 premium rubber air line for $3.99. The 50’ air line was $29.99 and the 75’ was originally $20. There are several 75’ lines left.
chipdog4
Well-known member
Local store has this Dewalt 15 gal compressor on clearance for $200. It's a display model and not on company wide clearance, so I don't know if they will keep dropping the price or not.
https://www.tractorsupply.com/tsc/product/dewalt-16-hp-15-gal-workshop-compressor?cm_vc=-10005
https://www.tractorsupply.com/tsc/product/dewalt-16-hp-15-gal-workshop-compressor?cm_vc=-10005