2018 Tractor Supply Clearance thread...

ARKeller · Apr 12, 2018

chipdog4 said:
Local store has this Dewalt 15 gal compressor on clearance for $200. It's a display model and not on company wide clearance, so I don't know if they will keep dropping the price or not.

https://www.tractorsupply.com/tsc/product/dewalt-16-hp-15-gal-workshop-compressor?cm_vc=-10005

Wish mine would drop the price on the display model.

Sent from my iPhone using Tapatalk

Poe34 · Apr 12, 2018

TSC will usually deal, make them an offer!

ARKeller · Apr 13, 2018

Poe34 said:
TSC will usually deal, make them an offer!

That worked, got it for 194.99.

ineedtools · Apr 13, 2018

Poe34 said:
TSC will usually deal, make them an offer!

Nice info I would have never thought to do that!

Lawson4450 · Apr 14, 2018

where do you consider central jersey lol I haven't been to the one by me in a while ill have to take a ride over there.

Poe34 · Apr 15, 2018

ARKeller said:
That worked, got it for 194.99.

Nice!

The Fram filters have been removed from inventory. They are either getting tossed, or you might find some thrown in a cart for fifty cents.

Jacks have been reduced again. Although they are sometimes difficult to find in the store, they are worth looking for! $10.99 is a crazy good deal.

antman213 · Apr 15, 2018

The store I go to is in Allentown NJ. Not much to be had from the here over there though

Poe34 · Apr 15, 2018

Drive to Sicklerville and grab the 2 jacks they have, and grab the ramps too. Well worth taking the drive.

ineedtools · Apr 15, 2018

Poe34 said:
Nice!

The Fram filters have been removed from inventory. They are either getting tossed, or you might find some thrown in a cart for fifty cents.

Jacks have been reduced again. Although they are sometimes difficult to find in the store, they are worth looking for! $10.99 is a crazy good deal.

I got to get over there on my day off Tuesday and look for these jacks!

antman213 · Apr 16, 2018

Just left siklerville,
1.5 ton jack....$6.99. Got both
6" vice $7.99. Got both
ramps $37. Got 1 of 2 sets

thanks OP's

ineedtools · Apr 16, 2018

Nice score! Can't wait to head out in the am to see what they have left.

Sent from my LGL164VL using Tapatalk

EOC_Jason · Apr 16, 2018

What's the link to the ramps? I need to check my store, those would really come in handy so I wouldn't have to keep borrowing a friend's.

antman213 · Apr 17, 2018

https://www.tractorsupply.com/tsc/product/cargosmart-aluminum-90-in-fixed-s-curve-ramp

That's the ramps..

And man, the cashier had to do a double take on my purchase. She looked mad for an older women. After she called another employee over to verify, she didn't look very happy. Its crazy that some of the employees don't even know about these deals.

EOC_Jason · Apr 17, 2018

Not available near me...

Oh well... Thanks for posting the link though.

chipdog4 · Apr 17, 2018

Picked up the last 2 vises and the 1.5 ton aluminum jack in my area.
The vises were $15.99 and the jack was $17.99. So south-central Indiana is behind your schedule for clearance.
Employees were surprised at the prices.
The manager who rang up the vises told me the best score he's seen was one of those battery powered kids' John Deere Gators, normally $250 ish and it had being sitting in the clearance area for some time. Rang up as $19.
He heard from another store manager that a $400 Husqvarna backpack blower sold for $40.

The Franklin, IN store has a Hobart 190 welder in the clearance area. Looks like it might have been a display or return? I think it was marked under $500 but could definitely be less by now.
https://www.tractorsupply.com/tsc/product/hobart-handler-190-mig-welder?cm_vc=-10005

Lots of flat back buckets on clearance in the horse section.
Forney .030 mig wire in 1lb spools on clearance, too. Remember seeing them a month ago.

honEXduner · Apr 17, 2018

Do these deals still show us as "Available" when searched on your local TS website? Just curious if it is worth looking for here as the items do not show as Available for pickup at the stores near me.

chipdog4 · Apr 17, 2018

Yeah, the website shows how many a store will (or should) have in stock, but never updates the price drops once it goes on clearance. That you will have to get from the store through a price check.

Click the "Check Store Availability" button to show what stores have stock and if you up the "quantity" to a couple, it will let you know how many each store has in stock.

leftyz · Apr 17, 2018

Well i went down to mine but struck out. They said it had stuff in stock,. But it lied.

Sent from my ONEPLUS A5000 using Tapatalk

Poe34 · Apr 17, 2018

antman213 said:
just left siklerville,
1.5 ton jack....$6.99. Got both
6" vice $7.99. Got both
ramps $37. Got 1 of 2 sets

thanks op's

nice!!!

Poe34 · Apr 17, 2018

leftyz said:
Well i went down to mine but struck out. They said it had stuff in stock,. But it lied.

Sent from my ONEPLUS A5000 using Tapatalk

For some reason, a few of my stores had the winch and the vice in the back. Jacks were always on the floor. Inventory count has been really accurate everywhere I have been!

leftyz · Apr 17, 2018

Poe34 said:
For some reason, a few of my stores had the winch and the vice in the back. Jacks were always on the floor. Inventory count has been really accurate everywhere I have been!

I had them look all over for the jacks. I had already gotten 3 from the store a few weeks back, i probably bought all they had but the inventory still said they had more.

The vise isn't listed as clearance at my store unfortunately. I would have been all over that.

Sent from my ONEPLUS A5000 using Tapatalk

Poe34 · Apr 17, 2018

leftyz said:
I had them look all over for the jacks. I had already gotten 3 from the store a few weeks back, i probably bought all they had but the inventory still said they had more.

The vise isn't listed as clearance at my store unfortunately. I would have been all over that.

Sent from my ONEPLUS A5000 using Tapatalk

Nobody got more than 3 jacks, I'm surprised they are still showing up in inventory. Are you looking at the correct vise? https://www.tractorsupply.com/tsc/product/olympia-tools-6-in-single-hand-quick-release-vise-1252271

There is another one that looks similar. Did you grab some ramps?

leftyz · Apr 17, 2018

Poe34 said:
Nobody got more than 3 jacks, I'm surprised they are still showing up in inventory. Are you looking at the correct vise? https://www.tractorsupply.com/tsc/product/olympia-tools-6-in-single-hand-quick-release-vise-1252271

There is another one that looks similar. Did you grab some ramps?

No ramps or vise at my store. No hitch toolbox adapter either

Sent from my ONEPLUS A5000 using Tapatalk

ineedtools · Apr 17, 2018

Struck out on everything, the guys at my TSC must be lurkers here on GJ now!

red · Apr 18, 2018

Poe34 said:
Nice!
Jacks have been reduced again. Although they are sometimes difficult to find in the store, they are worth looking for! $10.99 is a crazy good deal.

Well, can't believe my luck . . . finally found a jack!
It was still marked at $54.
So what the heck, I dragged it up to the register and asked for a price check. It was 24.99.

Wished I was videoing cause the look on the cashier's face was priceless.
And I knew that IF I didn't buy it, the jack would be gone before I pulled out of the parking lot.
So not as good a deal as the others, but for me good enough.

EOC_Jason · Apr 18, 2018

I might have to stop by my store again and do a price check. Maybe it finally dropped some.

Motown · Apr 18, 2018

I picked up 3 more jacks today, @$10.99ea, for a total of 6 jack in all.

ineedtools · Apr 18, 2018

Motown said:
I picked up 3 more jacks today, @$10.99ea, for a total of 6 jack in all.

Are you starting a jack outlet?

Poe34 · Apr 18, 2018

ineedtools said:
Are you starting a jack outlet?

I know I can't pass them up at that price. Lots of people will be getting a jack for Christmas, birthdays, Mothers Day, weddings...

chipdog4 · Apr 19, 2018

kxlexus · Apr 19, 2018

Those $4.99 hoodies are available at my store for buy online, pick up in store. However,
When I put them in my cart they revert back to full price. Any ideas on how to get them for sale price? I can’t go to the actual store until Sunday

JohnKal · Apr 19, 2018

^^^ Same here.

bubinga · Apr 19, 2018

kxlexus said:
Those $4.99 hoodies are available at my store for buy online, pick up in store. However,
When I put them in my cart they revert back to full price. Any ideas on how to get them for sale price? I can’t go to the actual store until Sunday

Waste of time going to the Tractor Supply 12 miles from my house it was the one and a half ton jack was still up to $35 nobody knew nothing about when they were going to lower the items if they did not sell.

Sent from my MotoG3 using Tapatalk

bubinga · Apr 19, 2018

bubinga said:
Waste of time going to the Tractor Supply 12 miles from my house it was the one and a half ton jack was still up to $35 nobody knew nothing about when they were going to lower the items if they did not sell.

Sent from my MotoG3 using Tapatalk

Did find this pair of jeans, said $50.00, reduced the price to $5.00.

Sent from my MotoG3 using Tapatalk

Motown · Apr 19, 2018

Did you have them scan the jack? It may scan at a lower price. And or if its the last one, they may mark it down.

bubinga · Apr 19, 2018

Motown said:
Did you have them scan the jack? It may scan at a lower price. And or if its the last one, they may mark it down.

yes, They Scanned it.
asked the manager about it too. he didn't know nothing.
I didn't ask him to match the $21.00 price.
Just told him I'd maybe check Back.

Poe34 · Apr 20, 2018

bubinga said:
yes, They Scanned it.
asked the manager about it too. he didn't know nothing.
I didn't ask him to match the $21.00 price.
Just told him I'd maybe check Back.

I grabbed the 3 that were in Cadiz this past Saturday. They had the ramps too, some cheap ammo cans... I bought a bunch of stuff that they were happy to get rid of. 99% of managers just want their clearance stuff gone. Most of them realize that we are doing them a favor by clearing up space for merchandise that is in demand, because if it's on the clearance rack, it's not in demand! Retail rent isn't cheap. I'm surprised the manager there wasn't more willing to get rid of the jack, even though TSC generally isn't supposed to price match clearance from other stores, with the exception of stores that sell clearance at 50% off the clearance price, not a single store has denied me. Often times, I offer to go get the receipt out of my car, and they tell me not to worry about it, and just change the price to what I tell them I paid elsewhere.

Let me know if you want a pic of my receipt from Cadiz for the jacks at $10.99.

bubinga · Apr 20, 2018

Poe34 said:
I grabbed the 3 that were in Cadiz this past Saturday. They had the ramps too, some cheap ammo cans... I bought a bunch of stuff that they were happy to get rid of. 99% of managers just want their clearance stuff gone. Most of them realize that we are doing them a favor by clearing up space for merchandise that is in demand, because if it's on the clearance rack, it's not in demand! Retail rent isn't cheap. I'm surprised the manager there wasn't more willing to get rid of the jack, even though TSC generally isn't supposed to price match clearance from other stores, with the exception of stores that sell clearance at 50% off the clearance price, not a single store has denied me. Often times, I offer to go get the receipt out of my car, and they tell me not to worry about it, and just change the price to what I tell them I paid elsewhere.

Let me know if you want a pic of my receipt from Cadiz for the jacks at $10.99.

Yes, Please,
I would like a receipt copy!! (Picture)

eddyyy302 · Apr 20, 2018

chipdog4 said:
Was looking at their clearance page a bit...

Carhartt hooded zip sweatshirt $5
https://www.tractorsupply.com/tsc/product/carhartt-mens-hw-hooded-zip-front-sweatshirt-125806399--1?cm_vc=-10005

THANK YOU CHIPDOG!!! Scored a hoodie for myself and one for a friend today! Thank you for sharing the deal!

:rocker:

Dan

leftyz · Apr 20, 2018

I tried to pick one up online, but my stores inventory quantity was wrong again

2018 Tractor Supply Clearance thread...

Active member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member