Homak RS-Pro 72" Tool Box

DTB · Oct 8, 2017

Flipping through the Q4 Napa real deals catalog and came across these. First I've seen of them and haven't found much on line about them. Anybody know anything about them?

bobcatdan · Oct 8, 2017

The H2 pro boxes are ok for the money so if these are a step above, probably pretty good. I'm guess not super deep, maybe 24", but 21" would be my guess. Assuming most deep drawers are double slides, 100 lbs slides are fine considering all the shallow drawers. That said, I'm guess on most because I haven't seen these.

Mr_B · Oct 8, 2017

Never seen an RS Pro range before .
interested in what depth these are .

DTB · Oct 8, 2017

The depth was what I was curious about as well. It seems to compete with the HF and other low budget 72" boxes in price range.

bobcatdan · Oct 8, 2017

Playing around on homark website, the box isn't on there, but the RS series looks to be migrate under the h2pro and Kennedy made big dawg series.

Mr_B · Oct 8, 2017

^ yeh they do H2PRO RS and PRO series but I not recall a RS PRO . At the price can't see it being one of there better ones but more details would be good .

Richard Cranium · Oct 8, 2017

Harbor Freight has the 72 inch on sale again at 999.99
Really hard to beat.

Mr_B · Oct 8, 2017

^ is hard beat at that price, upgrade castors and it very capable box for low buck .

Zivman · Nov 22, 2017

I was inquiring about the h2pro from my local Napa. The 72" with ss top... He brings out the flyer and shows me the rs-pro. The colors are subjective, but I like them... And I like the drawer layout better than the h2pro.

They list very similar details.. 100# drawer capacity, ball bearing slides etc. Then in big lettering, "limited lifetime warranty"

I would like info on what restrictions are on the warranty?

Also, anyone confirmed depth?

Is this box on par with the h2pro? Or is it a step down?

Sent from my ONEPLUS A5000 using Tapatalk

Zivman · Nov 23, 2017

found out they are 21" deep.

I am on the fence between one of these or the newer 24" deep masterforce boxes from menards

Mr_B · Nov 23, 2017

I'd check out the 24" masterforce first as maybe better box (extra depth BIG plus) and may have BF deal !

Zivman · Nov 24, 2017

Mr_B said:
I'd check out the 24" masterforce first as maybe better box (extra depth BIG plus) and may have BF deal !

I've been looking into this a lot... found a 41" listed on offer up. My local Napa got back to me as well as me calling an out of state store that had one instock.

They physically measure 24" deep. These seem like a great value

This is what local Napa sent me:

Sent from my ONEPLUS A5000 using Tapatalk

Mr_B · Nov 24, 2017

^ sound interesting if sale price a good one .

Zivman · Nov 24, 2017

Mr_B said:
^ sound interesting if sale price a good one .

I think it's a great value. I ordered the red model. I'm in MN. Seemed limited availability. Only red and blue available to me. I was ready to get the masterforce 72"... But with top, it was over 1700.

I should have it next week

Sent from my ONEPLUS A5000 using Tapatalk

Mr_B · Nov 24, 2017

what are the prices and sizes and options, does it have stainless top .

Zivman · Nov 28, 2017

Mr_B said:
what are the prices and sizes and options, does it have stainless top .

My box came in today. Nicely boxed... Maybe should have been crated, but came to my local Napa in good condition.

This is the 72".. Napa offered it in 3 colors. My local Napa said only two colors still available for this model. Yes, they come with a stainless top

They also offered a 41" roller with top chest for around a grand. I think there were 5 colors available for those.

I inquired about specs on the box from homak. They got back to me yesterday (already decided to order, but this was their reply)

"Hi xxxxx,

That particular unit is 24” deep. Each drawer can hold up to 100 lbs and three of the sixteen drawers do have double slides so they can hold 200 lbs. As far as quality we have heard great feedback from our customers everyone really likes this box."

Sent from my ONEPLUS A5000 using Tapatalk

Zivman · Nov 28, 2017

Zivman said:
My box came in today. Nicely boxed... Maybe should have been crated, but came to my local Napa in good condition.

This is the 72".. Napa offered it in 3 colors. My local Napa said only two colors still available for this model. Yes, they come with a stainless top

They also offered a 41" roller with top chest for around a grand. I think there were 5 colors available for those.

I inquired about specs on the box from homak. They got back to me yesterday (already decided to order, but this was their reply)

"Hi xxxxx,

That particular unit is 24” deep. Each drawer can hold up to 100 lbs and three of the sixteen drawers do have double slides so they can hold 200 lbs. As far as quality we have heard great feedback from our customers everyone really likes this box."

Sent from my ONEPLUS A5000 using Tapatalk

Here's a some pics I found of these boxes around the net.

Sent from my ONEPLUS A5000 using Tapatalk

blkSRT · Nov 28, 2017

A bit disappointing being that deep but only having 100 pound slides.

Mr_B · Nov 28, 2017

yeh 120lbs would seem as low as want go but as bigger drawers have double it not too bad, hopefully long top drawer has a under drawer slide for extra support ...

Zivman · Nov 28, 2017

Re: Homak RS-Pro 72" Tool Box

Mr_B said:
yeh 120lbs would seem as low as want go but as bigger drawers have double it not too bad, hopefully long top drawer has a under drawer slide for extra support ...

The box is really nice. Time will tell, but at this point I feel like I got great value. People want to compare everything to multi thousand dollar boxes.... My brother is an auto body tech and has a couple snappy boxes. He has had to replace slides at his expense. This might not be as good as one of those tool truck boxes but it's also much cheaper.... And has a lifetime warranty that includes things like the slides.

Overall I am more pleased with it than I expected to be.

Sent from my ONEPLUS A5000 using Tapatalk

Mr_B · Nov 28, 2017

It looks nice and got a lot of plus point features, slides would be good enough for me I expect but surprised not more than 100lbs for this homak grade box. warranty a plus though .
Not sure how much you paid but if cheaper than the masterforce it a good price and looks better . worktop looks nice and the drawer liners on homak pretty good, I not seen or touched on of these rs pro boxes but would like to . With the right owner the better cheaper boxes can last decades .
Enjoy your purchase ...

APS2000 · Nov 28, 2017

That's a good looking box. We need more pictures.

Zivman · Nov 29, 2017

1299 is what I paid. to get the newer masterforce with a top I priced it out over 1700... maybe cheaper with an 11% rebate or sale.

in comparison; I had touched and played with the h2pro many times at northern (41" and 56") and this box feels better than them. though, this box has a 5" caster set vs the 6" on the h2pro. the RSpro has physical latches that hold the drawers closed that the h2pro didn't have. also, I like the drawer layout better than the h2pro ... I like the masterforce layout better than the h2pro as well....

and then the kicker is the extra depth vs their h2pro and being about the same money.

Zivman · Nov 29, 2017

APS2000 said:
That's a good looking box. We need more pictures.

thanks.. anything in particular you want to see?

Zivman · Nov 29, 2017

Fully unboxed

Sent from my ONEPLUS A5000 using Tapatalk

Mr_B · Nov 29, 2017

Zivman said:
1299 is what I paid. to get the newer masterforce with a top I priced it out over 1700... maybe cheaper with an 11% rebate or sale.

in comparison; I had touched and played with the h2pro many times at northern (41" and 56") and this box feels better than them. though, this box has a 5" caster set vs the 6" on the h2pro. the RSpro has physical latches that hold the drawers closed that the h2pro didn't have. also, I like the drawer layout better than the h2pro ... I like the masterforce layout better than the h2pro as well....

and then the kicker is the extra depth vs their h2pro and being about the same money.

can't go wrong for that sort of price, it HF 72" money for way better featured box, proper handle latches, good liners, stainless top, warranty and nice layout and design . look sweet and priced sweet ...

Zivman · Nov 29, 2017

Mr_B said:
can't go wrong for that sort of price, it HF 72" money for way better featured box, proper handle latches, good liners, stainless top, warranty and nice layout and design . look sweet and priced sweet ...

I went and looked at the hf boxes... Given all the positive value talk about them I was disappointed with them. Kind of reconfirmed that the homak boxes were worth a couple hundred more

Sent from my ONEPLUS A5000 using Tapatalk

Mr_B · Nov 29, 2017

priced good, was that a promo price ?

Zivman · Nov 29, 2017

Mr_B said:
priced good, was that a promo price ?

It's in napa's quarterly tool book. That was the regular price I think.. look at the first pic in this thread. That was taken directly out of that book.

Sent from my ONEPLUS A5000 using Tapatalk

APS2000 · Dec 1, 2017

That's money well spent. The box has a lot of features at that price point.

Mr_B · Dec 1, 2017

Zivman said:
It's in napa's quarterly tool book. That was the regular price I think.. look at the first pic in this thread. That was taken directly out of that book.

Sent from my ONEPLUS A5000 using Tapatalk

Missed that image pricing .
Makes the HF 72" look overpriced and probably is as they stayed stagnant while competitors been busy in product developments and pricing .
This Homak looking a great top contender for low cost pro usable box or home box .
Will try and get look at one as never touched one to date.

Dtrance2k6 · Dec 7, 2017

Hey guys, did we ever figure out if the long top drawer had a center slide for support?

Zivman · Dec 7, 2017

Dtrance2k6 said:
Hey guys, did we ever figure out if the long top drawer had a center slide for support?

It does not

Sent from my ONEPLUS A5000 using Tapatalk

GasNSteering · Dec 7, 2017

Nice box. Looks like a good deal to me. Enjoy. How did you get it home and on the floor @635 pounds?

Zivman · Dec 7, 2017

GasNSteering said:
Nice box. Looks like a good deal to me. Enjoy. How did you get it home and on the floor @635 pounds?

They loaded with a forklift onto my pickup... And I'm a farmer, so had the forklift available on my end to unload. It's definitely heavy

Sent from my ONEPLUS A5000 using Tapatalk

gregpack · Dec 19, 2017

Any updates/second thoughts from the box owners? I'm thinking about buying one.

Zivman · Dec 19, 2017

gregpack said:
Any updates/second thoughts from the box owners? I'm thinking about buying one.

Only had it a few weeks, but still like it. Might buy the 41" setup for my other shop. Didn't really want to spend more than $500 though

Sent from my ONEPLUS A5000 using Tapatalk

Zivman · Dec 21, 2017

gregpack said:
Any updates/second thoughts from the box owners? I'm thinking about buying one.

I see homak has updated their website with the rs pro boxes:
link

lotus_guy01 · Dec 21, 2017

Zivman said:
I see homak has updated their website with the rs pro boxes:
link

With much higher pricing. I haven't been able to find any info on these online from NAPA. I've been seriously thinking about the HF 72" as I've outgrown my HF 41 (44") combo. It looks like this box could be worth the extra $$ at least at the Napa pricing...

Zivman · Dec 21, 2017

lotus_guy01 said:
With much higher pricing. I haven't been able to find any info on these online from NAPA. I've been seriously thinking about the HF 72" as I've outgrown my HF 41 (44") combo. It looks like this box could be worth the extra $$ at least at the Napa pricing...

Street pricing is definitely different than msrp. Look at the pricing on the h2pro on their site vs street pricing.

Imho these boxes are nicer than than the hf boxes.

Sent from my ONEPLUS A5000 using Tapatalk

Homak RS-Pro 72" Tool Box

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

New member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member