Marctrees
Well-known member
At TX/LA border 90 miles south of Shreveport - yesterday I finally got my foam sprayed - - 38x35x10 4/12 all Open cell - 7" +under roof, 5" + walls and gable ends.
Sprayed directly on typical new polebarn interior, straight to the steel and girts/ purlins.
That ends up approx 2900 sq ft total area roughly math @ 6" thick average.
So, roughly $1.45 per sq ft @ 6" thick.... so approx 24 cents per "Board ft"
They were not stingy w the foam, and VERY skilled sprayer and pro crew of 3 guys total.
Mature family biz been doing this for years, the Son comes in morning w the 3 guy crew to review everything and get them going.
2 overhead doors, one man door, 6 2x2' openings for fans, wall AC units, and intake vents.
Started spraying at 9 am, all cleaned up and down the road at 4 pm.
Amazing beautiful job... I did make clear I want it to look good, NEVER EVER seen OC sprayed as uniformly as this.
The sprayer, obviously very experienced, REALLY knew how to handle the gun and his material.
Very professional poly masking of everything.
NO ONE could have cleaned up any better.
Could not be any happier w the company.
VERY communicative and organized Son sales rep for the biz, had total patience to give me alternate option prices in the planning stages.
O, I got 5 bids from apparently historied contractors working this area - These guys I chose were the LOWEST bid of 5 competitors...I'm not gonna quote exactly what they charged out of respect for them cause it should have been more ( I think being a fussy observing on site customer I got a steal what with all the extra fill hence some scraping trimming needed by them)
But, to give you guys an idea of price I will say clearly under $4,500 out the door.
Glad to refer them to GJ members, they work roughly ballpark 100 miles radius of
Lufkin, TX.
Hoping to add some photos here next few days, and glad to show the work in person.
Marc
Sprayed directly on typical new polebarn interior, straight to the steel and girts/ purlins.
That ends up approx 2900 sq ft total area roughly math @ 6" thick average.
So, roughly $1.45 per sq ft @ 6" thick.... so approx 24 cents per "Board ft"
They were not stingy w the foam, and VERY skilled sprayer and pro crew of 3 guys total.
Mature family biz been doing this for years, the Son comes in morning w the 3 guy crew to review everything and get them going.
2 overhead doors, one man door, 6 2x2' openings for fans, wall AC units, and intake vents.
Started spraying at 9 am, all cleaned up and down the road at 4 pm.
Amazing beautiful job... I did make clear I want it to look good, NEVER EVER seen OC sprayed as uniformly as this.
The sprayer, obviously very experienced, REALLY knew how to handle the gun and his material.
Very professional poly masking of everything.
NO ONE could have cleaned up any better.
Could not be any happier w the company.
VERY communicative and organized Son sales rep for the biz, had total patience to give me alternate option prices in the planning stages.
O, I got 5 bids from apparently historied contractors working this area - These guys I chose were the LOWEST bid of 5 competitors...I'm not gonna quote exactly what they charged out of respect for them cause it should have been more ( I think being a fussy observing on site customer I got a steal what with all the extra fill hence some scraping trimming needed by them)
But, to give you guys an idea of price I will say clearly under $4,500 out the door.
Glad to refer them to GJ members, they work roughly ballpark 100 miles radius of
Lufkin, TX.
Hoping to add some photos here next few days, and glad to show the work in person.
Marc
Last edited:
