07 Mustang Wheeel Bearing Part

[Chaznsc]

Hello,
This week my front DS wheel bearing started to sing so I ordered the replacement part and have it all disassembled. Problem is the new part, and every part I see online for this model, is incorrect. The rear bearing is all wrong and wont sit down on the spindle.

What am I missing here?

2007 Mustang, V6 w/ABS

 

[Movover]

Take it to an autoparts store and match it up? Cant be that hard of a part to get, Try 2006 and 2008 maybe it was a split year ?

 

[Movover]

That one on the right is missing the Inner race, its probably still on the spindle

 

[KenC]

Just from the pic, looks to me like your old bearing came apart and the inner race may still be on the spindle.

 

[Chaznsc]

What I am missing is a BRAIN. The bearing had come apart.

 

[ScottsGT]

Be careful getting the race off if it is stuck. I'd start with heat and a slide hammer with an attachment that could get behind the edge.
Did you replace the spindle nut? Supposed to replace that after removing the original. Here's a tip, O'Rielly's carries them, but get the one they stock in the back in bulk box. The Motormite brand in blister pack is the same thing, but 2X the price.

 

[Chaznsc]

Be careful getting the race off if it is stuck. I'd start with heat and a slide hammer with an attachment that could get behind the edge.
Did you replace the spindle nut? Supposed to replace that after removing the original. Here's a tip, O'Rielly's carries them, but get the one they stock in the back in bulk box. The Motormite brand in blister pack is the same thing, but 2X the price.

It slid right off in my hand. And yes, i replaced the nut.