1/4" peg board hooks

[Varty Yo]

So im going with a wall control peg boards and they have 1/4" holes. All the hooks etc. are all 1/8-1/4" i want the hooks to fit tight as ive read guys complaining the hooks will fall out. Where are you guys finding 1/4" only hooks and stuff?

 

[nutjob]

I don't have a lot of peg board but it works well for me over the bench. I use the 1/4" thick hard board and Triton Durahook products. http://www.tritonproducts.com/pegboard-hooks/durahook/
These use a screw to hold the products in place.

Kevin

 

[SundayFunday]

McMaster.com

Probably not the cheapest, but they seem to have a good variety.

 

[nickleone]

Hot glue them in.

Nick

 

[AndyL]

This is partly why I've started designing and 3d printing pegboard gear lately.

I just tweaked my pegs to work with the Ikea skadis(?) System so I have this nice pic that semi shows how to get it to lock in nicely and not move

 

[Farrier]

I use Trinton

 

[joe_padavano]

Type 1/4 pegboard hooks into Google. Dozens of 1/4" only hooks come up. Here is only one of them. Heck, my local HD carries them. HF carries them.

https://www.hardwareandtools.com/hardware/hanging-hardware/pegboard-hooks-1-4-inch-heavy-duty/

 

[pioneer1]

I use these Pegboard hooks.
If I ever buy any more hooks I would look at the 1/4 for a tighter fit and no hook.

 

[Spareparts]

Got mine at HD 1/4" and fit snug

 

[ford33]

Durahook works for me.

 

[Bogie1632]

The Pegitz Peg Board Locks work well. They have 1/8 and 1/4" sizes and a few different colors to help match your board. Just look them up on Amazon. Prime eligible and less than $10 for 50 of them.

 

[joe_padavano]

I use these Pegboard hooks.
If I ever buy any more hooks I would look at the 1/4 for a tighter fit and no hook.

^^^THIS. I've used these for decades.

 

[Git]

^^^THIS. I've used these for decades.

^^^^ This

 

[eyeball]

1/4" peg board hooks

I have used talon hooks for years. The fit tightly and have a small nylon screw in the middle of the leg that when inserted tightens the fit even further.

When I switched from traditional pegboard to wallcontrol I was pleasantly surprised to find they worked equally well.

Here is a picture to help you visualize the function of the nylon screw.



https://talonhooks.com/

 

[CJ7VFR]

^^^THIS. I've used these for decades.

Me too! I use these on every hook that is in every piece of peg board I have.

They are inexpensive, and they work great. You can use them on 1/8 inch and 1/4 inch peg hooks.

Jim

 

[Varty Yo]

So what im looking for is complete sets of 1/4" hooks. Like a 50 piece set i dont wanna have to piece one together.

 

[NUTTSGT]

I bought some at Menard's and going to buy another pack today.