1/4" Snap-on bit driver ratchet.

[wesmamyke]

Hi folks. I have been searching the Snap-on website trying to find this tool. It's a 1/4" bit driver ratchet.

Regular ratchet but accepts directly 1/4" bit driver bits. Do they still make this thing? I can't find it for the life of me...search on the SO site seems broken at the moment too. Thanks all.

 

[krusty the clown]

like this?
http://www.aeincorporated.com/Kasta...detail&id=498&qs=cGFnZT1zdG9yZSZjYXRlZ29yeT0z

 

[wesmamyke]

Sorta...I swear it had the exact same handle as the regular 1/4" drive ratchet. Starting to think I'm crazy, looked all over the Snap-on site.

 

[Moose-LandTran]

Here you go:

http://buy1.snapon.com/catalog/item...=19712&supersede=&store=snapon-store&tool=all

TM936SET.

 

[wreckercologist]

Thanks for posting that link, krusty. I didn't realize Kastar was the OEM for so many tools.

For the OP: Is this what you're after?

http://buy1.snapon.com/catalog/item...group_ID=19712&store=snapon-store&dir=catalog

 

[wesmamyke]

Thanks! That would explain it, listed under screwdriver bits and ratchets.

 

[xstubsx]

ive got a bit adapter for 3/8

 

[t100]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_rdc=1&item=270505708564

 

[rsanter]

I wonder how much the kit is for that ratchet...
if you had a spare SO 1/4 dr ratchet you could convert one to be the bit driver

bob

 

[Moose-LandTran]

I wonder how much the kit is for that ratchet...
if you had a spare SO 1/4 dr ratchet you could convert one to be the bit driver

bob

I forget the exact price, but my dealer told me it was pretty cheap (maybe $15-20 inc. coverplate) and was a fairly common swap.

 

[walrus]

I wonder how much the kit is for that ratchet...
if you had a spare SO 1/4 dr ratchet you could convert one to be the bit driver

bob

Thats a good idea, anybody know the kit #

 

[48548]

I just ordered 2 of the kits for my ratchets... Here is the part number. RKRTM936 They are probably at my house already but I am out of town until tomorrow, I can let you know if it comes with the plate or not tommorrow and take some pictures if you need.

 

[Moose-LandTran]

This is the rebuild kit:

RKRTM936

http://buy1.snapon.com/catalog/item...group_ID=19712&store=snapon-store&dir=catalog

I don't have a part number for the cover plate.

 

[walrus]

I can let you know if it comes with the plate or not tommorrow and take some pictures if you need.

Please do, I have a 1/4 ratchet that would be a perfect donor

 

[48548]

Not a problem, I will take the pictures when I get home in the late evening on monday.

 

[ZRX61]

Sunex make a nice little kit with bits & a 1/4in driver/ratchet thingie

 

[48548]

I have the sunex and it is great. Now for Walrus, here are some pictures of the kit installed, you don't get a plate, but the 1/4 plate works just fine. I used a hi-lok ratchet and the top is open for that reason, but for 30 each on ebay new I couldn't complain and they work just fine. So to sum it up, just get the kit no plate and you have a bit ratchet for 10.00 Bottom is a picture of the nic sunex ratchet.

 

[walrus]

Thanks, I have some other stuff to get so I'll put together an order

Edit, ordered, thanks for the help