1" to 1.5" pipe reducer doesn't exist?

[Bmw4life]

My port on the diesel heater for air intake is 1" inch.
I purchased a pipe that's 1.5" Diameter, or rather 1.485" ID, 1.605" OD.

I'm trying to figure out how to connect 1" end to 1.5"

I found an adapter of 1" to 1.25" and 1.25" to 1.5"

Is there not a better way?

Do I really need to spend around $50 CAD to connect 1" pipe to 1.5" inch pipe?

 

[carlaisle]

The plumbing department is your friend. How about something like this: https://www.ebay.ca/itm/30556465781.../GwR+FdiQw7yhu8gzLzApxEw==|tkp:Bk9SR5jMz9HOZA

 

[firebirdparts]

The word "pipe" just isn't getting it done here.

 

[cgrutt]

Would a 1" pipe work better?

 

[welder4956]

https://www.amazon.com/Straight-Thi...Automotive/dp/B07XC659GW?tag=atomicindus08-20

 

[Bmw4life]

The plumbing department is your friend. How about something like this: https://www.ebay.ca/itm/305564657816?_skw=1.5"+x+1"+copper+reducer&itmmeta=01J9THKWR53HVX5ZHMZX2QDWVF&hash=item472512a898:g:9qcAAOSwoq9mQqTA&itmprp=enc:AQAJAAAA8HoV3kP08IDx+KZ9MfhVJKnCD+hXzGTGAIy7USfj50yeisvwYBXGtdcCwMVknCyr2oK1LRdfxdzAp+McJ89GXZm1CUftpUyNhgpOr3W1hggwp6TqpJWy6XMscY8EdxOVexLmVRMXL1xB5oNRYa2vHA4t2dSVVY15EJnusIwgyLdjhZ5oefgZ56WE79R3ExW3hP/SGSUdqAxIZbqUwN0RGND50/Lvs8Hfb8Oyt1tTO+VBFfBGS/54jvBX7aHq9qG2fSf4izCwetjExRbKQ1vDbuFIQIV/sU9DfI7epQmC7O/GwR+FdiQw7yhu8gzLzApxEw==|tkp:Bk9SR5jMz9HOZA

Thanks awesome, I've been looking for 3 hours lol! I wonder if a 90 degree elbow exists as well, one side 1 inch, the other side 1.5 inch? But even just with this reducer things became a lot easier.

 

[Bmw4life]

https://www.amazon.com/Straight-Thi...Automotive/dp/B07XC659GW?tag=atomicindus08-20

I have to stay with metal to prevent melting

 

[Bmw4life]

The reason I need 1.5" air intake pipe, is because I'll be routing the 1" air exhaust through that 1.5" intake pipe.

 

[Bmw4life]

Geez that's expensive!

https://www.grainger.ca/en/product/REDUCING-ELBOW%2C90%2CLL-CAST-BRZ%2C1-1-2%22X1%22/p/WWG40F206

 

[carlaisle]

Geez that's expensive!

https://www.grainger.ca/en/product/REDUCING-ELBOW%2C90%2CLL-CAST-BRZ%2C1-1-2%22X1%22/p/WWG40F206

Bronze = $$$.

You don't need copper, either, but it is readily available and in common use so more reasonably priced. Can you use threaded connections?

https://www.ebay.ca/itm/32459229457...NaO4e/EA=|tkp:Bk9SR7afq__OZA&var=513634220814

If not, the same part is available in cast steel which can be welded.

 

[Beemer]

Don't know if this is any help but:

https://www.supplyhouse.com/?utm_source=bingad&utm_medium=Search_SupplyHouse_X_X_Exact_X&msclkid=8789f47160ff137c11a99379ee41bb00

 

[Bmw4life]

The heater's ports are not threaded unfortunately.

Just ordered these

https://www.amazon.ca/dp/B0BRD9Z8FK?tag=atomicindus04-20

https://www.amazon.ca/dp/B0982HYTK7?tag=atomicindus04-20

About $50 CAD for reducer and elbow.