$10 off $10 at Lowes

RedFordTruck · Sep 11, 2012

Does anybody know if home depot will take these coupons?

wellpoison · Sep 11, 2012

i didnt get one, sent them an email and they sent me a code only good in store.

shoturtle · Sep 11, 2012

RedFordTruck said:
Does anybody know if home depot will take these coupons?

No, they will not honor a printout coupon. Only the coupons form lowes in the circulars.

archirelic · Sep 11, 2012

I had finally received mine, two out of the three I signed up for. They came to my inbox, not the spam folder. Perhaps just an overflow of requests?

Anyhoo...

RedFordTruck said:
Does anybody know if home depot will take these coupons?

Yes, but YMMV. I printed both out, didn't find anything to my liking and off to Home Depot I went. They accepted them without the slightest hesitation. I can snap some pics of my receipts when I get back to my house.

RedFordTruck · Sep 11, 2012

archirelic said:
I had finally received mine, two out of the three I signed up for. They came to my inbox, not the spam folder. Perhaps just an overflow of requests?

Anyhoo...

Yes, but YMMV. I printed both out, didn't find anything to my liking and off to Home Depot I went. They accepted them without the slightest hesitation. I can snap some pics of my receipts when I get back to my house.

Do they scan it or just manually take $10 off?

MMehler · Sep 11, 2012

Well I signed up, got mine the next day or two later and used it today. New Dremel for me, yay!

Thanks!

jrherald420 · Sep 11, 2012

Just used my wifes coupon to buy a cheap Stanley 22" toolbox, cost me 7.00 for the box and i now have gained a open drawer in my Snap On roll cart!! woohoo!!

archirelic · Sep 11, 2012

RedFordTruck said:
Do they scan it or just manually take $10 off?

It won't scan b/c it's a Lowe's coupon, so the cashier just manually entered in a 10 dollar competitor discount code.

And I did ask as I approached the register if they would accept it, they told me yes. So I didn't just dump it on them at the last minute, I showcased the coupon & told them the format of it, print out from an email, and there wasn't any hesitation on their part.

RedFordTruck · Sep 11, 2012

Ok cool. Im on a mission to build a tool kit for under $100 so this will be handy.

Off topic here, but basically im trying to make a tool box kit that I keep in my truck that I dont give a **** if I lose something or somethings stolen.

-Pliers, screwdrivers, sockets, wrenches, hammer, few other basic things.

And I refuse to buy harbor freight stuff fyi.

Once im done ill make a thread in the main section with all of my purchases. :thumbup:

archirelic · Sep 11, 2012

RedFordTruck said:
Ok cool. Im on a mission to build a tool kit for under $100 so this will be handy.

Off topic here, but basically im trying to make a tool box kit that I keep in my truck that I dont give a **** if I lose something or somethings stolen.

-Pliers, screwdrivers, sockets, wrenches, hammer, few other basic things.

And I refuse to buy harbor freight stuff fyi.

Once im done ill make a thread in the main section with all of my purchases.

Pick up their 4 piece Husky double box end wrench sets. There's a 4 piece sae and a 4 piece metric and they're like 12.**. If you use a couple for each one, you'll be out the door for each one costing a little over 3.** Not too bad for two, 4 piece double box end wrench sets.

RedFordTruck · Sep 11, 2012

archirelic said:
Pick up their 4 piece Husky double box end wrench sets. There's a 4 piece sae and a 4 piece metric and they're like 12.**. If you use a couple for each one, you'll be out the door for each one costing a little over 3.** Not too bad for two, 4 piece double box end wrench sets.

Yeah i was looking at a few things online. Figured I could use coupons for whatever I buy. Im usually a big USA made fan (dont have any chinese tools in my main box :pimpflash

)but for this set im not too concerned.

http://www.homedepot.com/Tools-Hard...Id=10053&langId=-1&storeId=10051#.UFADC42PVh4

Already used 1 Lowes coupon and walked out with this plier set for $5.28

http://www.lowes.com/pd_253677-1687...L=?Ns=p_product_qty_sales_dollar|1&facetInfo=

dfoxengr · Sep 12, 2012

I didn't get a coupon so I called the number on the mylowes.com page and gave them some info. They sent me an apology email with a code in it. Not a scannable coupon but the long code under the barcode. Going to try it at the store today.

"
Need Help? Call 1-800-445-6937
"

BJ42LX · Sep 13, 2012

Gaak! I printed my coupon at work last evening and forgot about it - left it on the printer. When I came in this morning it was gone. Thieves!

Now I have to run to Lowe's and buy SOMETHING/ANYTHING before the thief does. Jerk.

Edit: stopped at Lowe's at lunchtime. My coupon was already claimed. Bastards!

Need4racin · Sep 13, 2012

LOL ^^

Bought some fine sandpaper for $12, couldn't find anything else I needed.

Car-aholic · Sep 13, 2012

I tried last night and again today and was unble to get this Lowes deal. It said on the site that it was expired. Has anyone else gotten it today?

Thanks, G

pfctblu · Sep 13, 2012

RedFordTruck said:
Ok cool. Im on a mission to build a tool kit for under $100 so this will be handy.

Off topic here, but basically im trying to make a tool box kit that I keep in my truck that I dont give a **** if I lose something or somethings stolen.

-Pliers, screwdrivers, sockets, wrenches, hammer, few other basic things.

And I refuse to buy harbor freight stuff fyi.

Once im done ill make a thread in the main section with all of my purchases.

I got my coupons for lowes no problem (thanks to the OP for the thread). Saw this post and thougth Id mention that I noticed on Ebay a few USA made Channellock tool kits in cases with the lifetime warranty on them too. Certainly not the cream of the crop but not a bad deal and maybe worth a look.

EDIT: Even less on Amazon (suspect of USA made here though, please verify if important to you)

RedFordTruck · Sep 13, 2012

Did channellock once make Ratchets/sockets in the usa and then move to china?

pfctblu · Sep 13, 2012

RedFordTruck said:
Did channellock once make Ratchets/sockets in the usa and then move to china?

I've been digging around trying to find that out too. For what its worth, I saw that the ratcheting screwdriver (13 in 1) driver lists as made in Canada. While the ratchet wrenches claim made in USA on Channellock's site. I haven't been able to find out about the ratchets though.

Still, at $65 for the set, not too shabby for a 72t set like that. Hope it helped.

RedFordTruck · Sep 14, 2012

pfctblu said:
I've been digging around trying to find that out too. For what its worth, I saw that the ratcheting screwdriver (13 in 1) driver lists as made in Canada. While the ratchet wrenches claim made in USA on Channellock's site. I haven't been able to find out about the ratchets though.

Still, at $65 for the set, not too shabby for a 72t set like that. Hope it helped.

Yeah im looking at that one on amazon or Lowes has some new 3/8'' drive 6 pt sets on sale for $19.97 and I could get them for $9.97 after coupons!

http://www.lowes.com/pd_338525-2542...L=?Ns=p_product_qty_sales_dollar|1&facetInfo=

shoturtle · Sep 14, 2012

went the email route, and got the code. Picked up a nickolson 4 in 1 hacksaw for 15 bucks.

http://www.lowes.com/pd_163712-273-...&currentURL=?Ntt=nickolson+hacksaw&facetInfo=

archirelic · Sep 14, 2012

Well here's the pics of my receipts being accepted at Home Depot that I alluded to earlier. And yes, not only did I use my coupons, but I used the coupons of those I told to sign up that I knew would never, ever use them. So in the end, a great way to stock up on "filler" material for the garage. Oh, and there's one Lowe's receipt in here, haha!

shoturtle · Sep 14, 2012

HD around me never takes print out coupons. Wish they would, there are couple of saw blades I would like to get.

archirelic · Sep 14, 2012

shoturtle said:
HD around me never takes print out coupons. Wish they would, there are couple of saw blades I would like to get.

I went to two separate Home Depot locations and they didn't hesitate at either location. The only "issue" I had at the first Home Depot I went to, was that the cashier didn't know what she was doing on the register.

RedFordTruck · Sep 14, 2012

archirelic said:
Well here's the pics of my receipts being accepted at Home Depot that I alluded to earlier. And yes, not only did I use my coupons, but I used the coupons of those I told to sign up that I knew would never, ever use them. So in the end, a great way to stock up on "filler" material for the garage. Oh, and there's one Lowe's receipt in here, haha!

Sweet! Yeah i figured i could use the coupons at lowes then use a copy at home depot since they dont scan it :beer:

Overall i went 4 for 6. Signed up 6x with lowes and got 4 coupons

On top of all of this I just got an email from sears with $10 in free SYWR points!

Looks like my plan for a $100 tool kit is a go!

Nch209 · Sep 15, 2012

I just called lowes for kicks, first guy was cool and then we got disconnected. Second girl was a hag and was yelling at me stating it was just a program to see how many people would sign up and no guarantee of being issued a coupon! Oh well!

RedFordTruck · Sep 16, 2012

I went to home depot twice today. First store did NOT take the coupon and said they dont take computer generated coupons. Went to another home depot and they took the coupon no problem and I walked out with a pair of Channellock 440 (12'') pliers for $5! Theyre gonna be part of my $100 kit.

So far Ive spent $68 and the only major things I lack are SAE sockets and wrenches.

Got a nice box, ton of screwdrivers(flat, phillips, torx and precision), bunch of pliers, pair o vise grips(USA with global materials), metric wrenches, metric sockets 10-18 deep and short with a 3/8 ratchet and u-joint, few other things (hammer, level, jab saw, tape measure, box cutter, etc)

Im gonna be done with it in the near future so ill post a thread when im done!

bigdaddyisu · Sep 16, 2012

I signed up twice (different e-mails and different computers) and never rec'd the coupon. Oh well.

shoturtle · Sep 16, 2012

you can contact them through mylowes, if you fully set up the mylowes account, and they will send you a code that will work at the store.

Mekhanic1 · Sep 17, 2012

A few friends and myself signed up and got nothing.

I signed up again after about 3 days of waiting and got the $10 gift card within 12 hrs. Went to use it today and they said it was already used. lol endless nonsense.

_vin_ · Sep 17, 2012

thanks for the heads up.
i used the coupon on this http://www.lowes.com/ProductDisplay?partNumber=338525-22328-85190&langId=-1&storeId=10151&productId=3364142&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1 Kobalt 19-Piece Metric Mechanics Tool Set with Case

RedFordTruck · Sep 17, 2012

_vin_ said:
thanks for the heads up.
i used the coupon on this http://www.lowes.com/ProductDisplay?partNumber=338525-22328-85190&langId=-1&storeId=10151&productId=3364142&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1 Kobalt 19-Piece Metric Mechanics Tool Set with Case

Yeah i already used a coupon on the Metric and got it for $10 and plan on using my last $10 off $10 on the SAE version of that set :rocker:

haveissues · Sep 18, 2012

I received the coupon but no barcode printed out on it.

chris1280 · Sep 18, 2012

With the coupons I picked up my first set of Channellock products... Long Nose Pliers #318 and Tongue and Groove Pliers #426, 420, 440 and #61CB a 6 'n 1 screwdriver

http://www.lowes.com/pd_39442-922-G...tURL=?Ntt=channellock&facetInfo=#BVRRWidgetID

http://www.lowes.com/pd_7006-922-31...k&pl=1&currentURL=?Ntt=channellock&facetInfo=

Thanks for the heads up on these coupons :beer:

azcactus · Sep 22, 2012

eeeeeeeeee

Redex · Sep 25, 2012

_vin_ said:
thanks for the heads up.
i used the coupon on this http://www.lowes.com/ProductDisplay?partNumber=338525-22328-85190&langId=-1&storeId=10151&productId=3364142&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1 Kobalt 19-Piece Metric Mechanics Tool Set with Case

I just bought the exact same thing today, $10 can't be beat. going to sign up for another one and get the SAE set.

RedFordTruck · Sep 25, 2012

So I have now used all 4 of mine and in the end after buying stuff on sale + using Coupons, I got $155 worth of Kobalt junk for $25.41

Not bad if you ask me :bounce:

shoturtle · Sep 25, 2012

If it is junk, why even bother getting it. They are not usa made.

RedFordTruck · Sep 25, 2012

shoturtle said:
If it is junk, why even bother getting it. They are not usa made.

Just Cheap junk to keep in my truck in case I need it. Id rather lose or have someone steal a pair of cheap Kobalt pliers than a pair of Channellocks.

I literally paid pennies on the dollar for some of it. $0.41 for everything in the picture. I could break something and warranty it for more than that in store credit :bounce:

$10 off $10 at Lowes

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Banned

New member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member