1050 sq ft

[slidewayes]

Lets see how this go's. Have been retired for 5 years from the construction or should I say Deconstruction industry. Cutting and removing concrete, I have taken apart every type building there is.so let's see if I can put one together. Plan on using it to house my ever growing assortment of Motorcycles and tools. mill ,lathe,welders and such

 

[slidewayes]

http://40.media.tumblr.com/3c7e33a3653f9e133a1e48e4ab6d964f/tumblr_na00d7MbXI1szdzboo1_1280.jpg you will haft to excuse me while I learn how to post on hear correctly

 

[Dajn]

Something tells me you know all about an old target or cimline with the 65 horse four cylinder wisconsin. Am I right?

 

[slidewayes]

Wisconsin's and there cast iron flywheel were the backbone of the industry for many years now turbo diesels with a gear box

 

[sunsation288]

More picture from toy please


Envoyé de mon iPhone à l'aide de Tapatalk

 

[sunsation288]

Of toy ... Sorry


Envoyé de mon iPhone à l'aide de Tapatalk

 

[Dajn]

Wisconsin's and there cast iron flywheel were the backbone of the industry for many years now turbo diesels with a gear box

Very true. My 30 horse 4 cylinder wisconsin still runs great in my old bobcat 610. I have been around many target and cimline walk behind saws with 65 horse wisconsin engines. They sure burn gas like a son of a ***** though. 5 gallons an hour is normal.

 

[Notgrownup]

Is that a Kz900 or 1000 I see on the left behind the Sporty...

 

[slidewayes]

1981 kz1300 120hp 85flb shaft drive

 

[slidewayes]

more toys

 

[Notgrownup]

1981 kz1300 120hp 85flb shaft drive

You ****....lol

 

[slidewayes]

starting to move forward

 

[slidewayes]

might be going overboard inspector calls it a NASA launch pad 6" slab #4 bars 20" centers 200amp service ,Not quite up NASA but a stout little garage

 

[Notgrownup]

You won't regret it...

 

[slidewayes]

Went with low bid on concrete. Not Happy lesson learned all I wanted was Flat , level and smooth Contractor knocked off15% would have gladly added it for a good job f...ing pissed

 

[slidewayes]

moving along more pic.

 

[65cayne]

keep em coming! Looks great so far.

 

[Notgrownup]

Nice...booming along good... I am sure you are happy with the progress.

 

[Chevy-SS]

Looks great. Nice dog too, LOL.

Do you have a section with a higher ceiling? Looks like the ceiling is kinda low, not enough for a lift......

-

 

[slidewayes]

10' 3" foot ceiling no need for car lift don't/won't work on them only motorcycles!

 

[Notgrownup]

10' 3" foot ceiling no need for car lift don't/won't work on them only motorcycles!

Amen brother...

 

[slidewayes]

plaster and new door

 

[slidewayes]

a few more shot's, 47 yard's mostly 6" drive and parking 4' wide walkway around the back and to house

 

[92nsx]

That's a lot of concrete!

 

[UncleDirty]

Congrats on your new moto playhouse.
Dig your scooters too.
I remember how exciting it was to build my shop up in the Hi Dez. I was in Oak Hills for 16 years. I really miss hitting the trails right from my garage, and being closer to the dezert races. But I don't miss the commute thru the Cajon pass.

 

[j p smith]

Nice looking property and new shop.

 

[LXCam]

OP, that's turning out SWEET!. Congrats and best of luck with it.

But I don't miss the commute thru the Cajon pass.

I've been doing the opposite commute for the last four years. It now completely ***** for both directions.

 

[slidewayes]

Ended up with a little over 2500 sq. ft. of flatwork 48yards ,walkways had to be pumped all the drive/parking is hard rock 6 sack 6" slab.

 

[slidewayes]

My son cutting the joints It's all troweled to a shine!

 

[j p smith]

I have been away from the Concrete Cutting industry for some time, what brand of saw? Where I worked we ran Meco's with old rebuilt Target 35/wisconsin back up saws and big Soffcuts for greens

 

[slidewayes]

MECO is out of business ,Wisconsin too .This is a Husqvarna has a 4cyl turbo charged import and a 3 speed trans The axel can be locked or not Think it is rated at 45/50 HP can swing a 36" and not brake a sweat

 

[j p smith]

That would be a nice saw to run!. I believe now that I think about it Meco was bought by Husqvarna. I made several trips to Prescott to pick up saws when bought them.

 

[slidewayes]

Got lift in and some drywall up . the core is from the lift then auger out 56"of dirt had it installed in about an hour or so

 

[slidewayes]

Drywall up

 

[slidewayes]

A little more paint to do, Then move the lathe + Mill in , build some workbenches + cabinets getting tired I need to go for a ride and forget about this for a while. Could not do it with out her help

 

[slidewayes]

Done with the paint .Moved the lathe+Mill in

 

[slidewayes]

3 years later and it's too small

 

[johnand]

Look great. I like the paint color scheme and the motorcycle lift is cool.