1966 DeVilbiss Compressor

[rider9195]

Hello everyone, it has been quite a while since I have posted here.

I just acquired this old DeVilbiss compressor and honestly have no use for it. It seems to have some changes made to say the least. The motor looks different from what it would have came with even though it is a Baldor motor.

It does turn on and build up some pressure so it isn't complete junk. But for sure it needs some restoration. I am mainly looking for information on it and eventually sell it. Unsure on a fair price for something of this vintage. Hoping you folks here could comment you opinion and suggestions.

Thanks!



Sent from my SM-G950U using Tapatalk

 

[ndnchf]

That was a fine old compressor in its day. The biggest issue with old compressors is the integrity of the tank. With something like this that is well over 50 years old, no doubt there is corrosion in the tank. No telling how bad it is. It may hold air just fine today, but a pin hole (or worse) leak could easily develop tomorrow. That probably has a thicker tank than many home owner grade compressors made today. But still age catches up with all of them. Its a cool piece, but the only way to be sure its safe is to have the tank hydro tested.

 

[Lenny B]

I would contact Pacific Compressor or one of the other Compressor parts suppliers and find out if a rebuild kit and tech sheet is available for it and get an idea of the actual cost to return it to good working order, or if it's even possible. Also see what the HP and CFM output is for that pump since that is what anyone who plans to use it will want to know.

Also, the problem with restoring old units like that is it cost just as much to rebuild as it does to buy a modern unit. An example is: Eaton's 5HP inline 19CFM@100psi and 17CFM @175 sells for $516 brand new. Has disc valves, two stage, cast iron construction, stainless disc valves, great customer support, etc..... Kinda of makes it hard to put the same amount into an old unit unless you are doing it as a hobby for nastalgia.