To avoid these ads, REGISTER NOW!

2 Month Old Concrete, Already Has Cracks

jw3571

Active member
Joined
May 25, 2009
Messages
38
This is really upsetting, I had the concrete poured around 2 months ago and some light spider web cracks. Is this normal to crack so soon? Is there anything I can do?
 
To avoid these ads, REGISTER NOW!

palmab

New member
Joined
Dec 15, 2014
Messages
1
I had the very same thing happen to newly poured concrete, but it was right after the first winter it saw. Only a few months after it was poured. It was a rough winter with lots of temp changes. I just sealed the cracks with DAP sealer.
 

Steroblan

Well-known member
Joined
Jan 31, 2012
Messages
259
Location
Northern Calif
The expansion joints and score cuts are to help control where the concrete will crack. So the question is when will it crack not so much if.
 

boobag

Well-known member
Joined
Aug 15, 2010
Messages
397
concrete floors need a troweled in expansion joint, or it needs to be saw cut the day after pouring, every 12' or so. this will help control the cracks that WILL occurr.
 

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
OP . . . it depends if your "spider web" cracks are cosmetic only . . . OR . . . more serious cracks indicating settling of the entire pad in that area.

Post up pictures of problem areas. Let's SEE what you're talking about.

:needpics:
 
To avoid these ads, REGISTER NOW!

ms fowler

Well-known member
Joined
Jun 27, 2012
Messages
450
Location
Littlestown, PA _ 6 miles south of Gettysburg
Spider web cracks are more likely due to excessive water when placed. Specs usually allow a 3" to 5" slump, but the crews like it wetter--like around a 7" as its easier to work.
Hint for anyone thinking about having a slab poured---talk with the contractor and the concrete supplier about the cost of plasticizer being added to the mix. It'll make a 2" slump work like a 7"
 

Scsmith42

Well-known member
Joined
Nov 20, 2014
Messages
132
Location
New Hill, NC
Spider web cracks are more likely due to excessive water when placed. Specs usually allow a 3" to 5" slump, but the crews like it wetter--like around a 7" as its easier to work.
Hint for anyone thinking about having a slab poured---talk with the contractor and the concrete supplier about the cost of plasticizer being added to the mix. It'll make a 2" slump work like a 7"


^ this is very good advice.


Scott
 
To avoid these ads, REGISTER NOW!
Top Bottom