I have 3 bottle Jack's with number plates missing.i grew up with these so they have meaning. One is a 12 ton Hein warner , 2nd is a mid 1960s 5 ton ,orange colored Sears,3rd is a 1.5 ton again Sears mid 60s. The 2 Sears seem to have same pump. I just need to know where and what parts to order? Thank you.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
3 Bottle Jacks Id like to save
- Thread starter SDBOB1
- Start date
mike93lx
ALLIANCE MEMBER
Sharing info on what's wrong with them might help.
You'll likely need to disassemble them and take measurements to get the right parts
You'll likely need to disassemble them and take measurements to get the right parts
driftpin
Well-known member
Sharing info on what's wrong with them might help.
You'll likely need to disassemble them and take measurements to get the right parts
One source
Another: https://www.hcrcnow.com/
Last edited:
All 3 are leaking ,will not hold fluid seems at the pump. They havent been bent,or really abused just normal lifting within there range. Not rusty at all. I know they have never been rebuilt. I bought 2 HF Jack's to replace but these 3 have been with me since about 1967. So I thought take apart clean and replace the orings. Just need to know what to order.