To avoid these ads, REGISTER NOW!

3 car overhaul! Chicago, Il

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
Just finished Drywall and paint. Just Etched Floor and will be Applying Rustoleum Epoxy paint in the AM. The start of this Prodject.a garage.jpg

garage.jpg
 
To avoid these ads, REGISTER NOW!
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
At one point it already had a lift and all. removed it all for remodel.Will have new lift when done.
 
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
rUSTOLEUM FLOOR IS IN TODAY!! lOOKS AWESOME!! NOW TO PAINT THE WALLS AND TRIM IT OUT WITH SOME BASEBOARD. I PAINTED THE GAS CURB ALSO, NEXT CABINETS AND A WORK STATION.[/ATTACH]
 

Attachments

  • Garage floor.jpg
    Garage floor.jpg
    57.9 KB · Views: 441
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
painted the doors and put a stripe on the wall. Not sure if I like the stripe yet. i am going to paint the wall below the stripe a siver/gray. and put red baseboard around. what do you think? I'm also going to have red cabinets
 

Attachments

  • 284427_267192983294671_100000119153724_1252718_7055460_n.jpg
    284427_267192983294671_100000119153724_1252718_7055460_n.jpg
    49.6 KB · Views: 312
  • 215187_267197769960859_100000119153724_1252775_8337009_n.jpg
    215187_267197769960859_100000119153724_1252775_8337009_n.jpg
    50 KB · Views: 350
Last edited:
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
Installed most of my cabinets .need one 36" wall cabinet and a 15" all drawer base all the way to the right. With a small frige in the middle. I mounted the cabinets on the gas curb and will be installing legs on the front of the cabs. Used menards unfinished oak cabs and counter tops The open area in the center is like a desk area and there will be a flat panel tv on the wall there. Looks like I have some painting to do too. I can feel the end is near. I need some rest!! The wood legs are temporary. And that is a lazy suzan in the corner.


shop 023.jpg

shop 018.jpg

shop 020.jpg

shop 021.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
Ok cabs are in @@@@ back to painting
 

Attachments

  • shop 011.jpg
    shop 011.jpg
    141.9 KB · Views: 185
Last edited:
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
shop 005.jpg

shop 007.jpg

--------------------------------------------------------------------------------

I used 1/2" carriage bolts for the front legs.( Stainless) Seeing the floor is pitched and the back of the cabs are screwed to the wall sitting on the gas curb. I got lucky the concrete guys did a decent job and they were pretty level. So I could adjust each leg exactly. Too tell ya the truth the cabs were solid just mounted to the wall. But this is better!! Mounting them on the wall on the gas curb gave me two benefits. Got the cabs off the floor for cleaning and saved some space since theres no wasted space behind them.
Attached Thumbnails
 
Last edited:
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
painting a little every night after work.Hope to have it done by Friday. Then I am gonna trim the cabinet part in polished aluminium And come up with the some cool handles. i have been trying to find athat cool chome trim that they put on tool box drawers?? Cant find it anywhere. I did see chrome car door trim:mad:

The tops are done now just have to put the doors back on the other half.Pigture is from earlier! Still have to put a end cap on the bottom lazy suzan.
 

Attachments

  • 2011-08-16%2006_28_53.jpg
    2011-08-16%2006_28_53.jpg
    96.4 KB · Views: 236
Last edited:
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
I continued the 4" Black baseboard all around the cabinets also. looks really cool and makes them look custom..Today the Tv gets hung.And counter tops get cut and installed.
 

Attachments

  • 2011-08-20%2012_07_32.jpg
    2011-08-20%2012_07_32.jpg
    95.4 KB · Views: 407
Last edited:
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
It would look better with that Roadster in there but I sold it!!! That seems to be what I do though. Get $$$ for the next prodject. There might be another in my future though. Thought this was a cool pic I took tonight. got my bike back home at least..Tv is in and I have done some decorating.
 

Attachments

  • night 029.jpg
    night 029.jpg
    138.9 KB · Views: 489
OP
B

Brentocool

Well-known member
Joined
Aug 3, 2011
Messages
1,088
Location
Chicago.Il
new sign..Screwed up my union card says 83 o well close enough!
 

Attachments

  • 2011-08-24%2017_47_40.jpg
    2011-08-24%2017_47_40.jpg
    90.1 KB · Views: 243
Last edited:

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Good deal Brent honestly I think that may be the best thing I have done to my garage :D since it allows me to actually hang out out here without being bugged by bugs :D.

Rick
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
You took it down ? Oh wait you actually park cars in your garage :D. Mine stays up until it gets to cold for bugs to be outside :D.

Rick
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Brent I dont know how to tell you this but it looks a little crooked there :D. Otherwise it looks great and reminds me of something else I need to do to my shop:D.


Rick
 
To avoid these ads, REGISTER NOW!
Top Bottom