You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
30mm & 2" socket
- Thread starter biggie
- Start date
Gary S
Well-known member
Have you looked in your local stores that sell tools?
scott37300
Well-known member
30mm is very common, all auto parts stores and HF even carry them, used for axle nuts. Amazon.com also has them along with many other online tool stores.
2" is a bit more "rare" but still findable. HF sells a 3/4" drive kit for 50 bucks(and you can use a 20% off coupon so 40 bucks plus tax) that has a 2" socket in it, http://www.harborfreight.com/21-piece-sae-3-4-quarter-inch-industrial-quality-socket-set-40996.html.
And there is always snap on which has both if you want.
2" is a bit more "rare" but still findable. HF sells a 3/4" drive kit for 50 bucks(and you can use a 20% off coupon so 40 bucks plus tax) that has a 2" socket in it, http://www.harborfreight.com/21-piece-sae-3-4-quarter-inch-industrial-quality-socket-set-40996.html.
And there is always snap on which has both if you want.
sawatch
Well-known member
Got a 30mm at NAPA & a 2" at pawn shop. You'll make out better [$ wise] buying that way 'cause of shipping cost for them from a member.